Tripp Lite MT-SE-37/02 owner manual Display Settings

Page 25

	Tripp Lite
	After you have set the UPS address, you can return to the main
	setup screen by typing 0 and pressing Enter.

NOTE:	The UPS address you set must correspond to the address
	of the UPS you want the SNMP adapter to communicate
	with.
	Display Settings
	This screen displays all of SNMP Solo’s current settings. To
	access this screen, type 5 at the prompt from the Main Menu.
	The current settings display:

Figure 10 Display All Current Settings

The settings are the following fields:

•Local, SNMP Solo’s, Address and serial number (physical address)

•Gateway and Network address

•System Contact Name (Your system administrator’s or a contact’s name)

•System Name

Configuration19

Image 25

Contents Snmp Solo Limited Warranty FCC Compliance Governing LawConventions Used In This Guide TrademarksTable of Contents Appendix Introduction Snmp Solo FeaturesExample Network With Snmp Solo Snmp Solo Package Snmp Solo Package ContentsStatus LEDs Power Supply Configuration CableTwo 3.5 Diskettes UPS Interface Cable System Requirements System Requirements Initial Installation Initial Installation Hardware adapter prior to configuring the device ConfigurationIP address Set IP And Gateway Addresses And MIB System GroupTripp Lite Configuration Access Controls Set Access ControlsSet Trap Receivers Trap Receivers Additional Setup Screen Additional Setup ScreenDisplay Settings To Save and Exit Reset Configuration to DefaultTelnet options TelNet OptionsExit Without Saving Upload FirmwareVerify the Snmp Solo Operation Final InstallationEstablish Network Communications General Network Management Stations Configuring the NMSPoll the Device OIDs From the Test Connectivity box Add Snmp Solo Object to the Management Map SunConnect SunNet ManagerPoll the Device OIDs Reference AppendixCommunities IP AddressesClass Value of First Network ID Host ID Number Subnetting and Subnet MasksRouting and Filtering GatewaysAgent GlossaryOID Plugged into their respective ports TroubleshootingComputer System Placing a Technical Support Call773 Technical SupportReference Worksheet