Tripp Lite MT-SE-37/02 owner manual Poll the Device OIDs

Page 32

SNMP Solo

4.Enter a name for the object in the Selection and Label fields of the Add Object box.

5.Highlight IP Map from Object Attributes group.

6.Select Set Object Attributes button.

7.Enter Host name and IP address of SNMP Solo adapter.

8.Enter OK.

9.Enter OK at Add Object menu.

10.Enter OK at Add Object:palette.

Poll the Device OIDs

1.From the main menu, select Monitor: MIB values then

Browse MIB: SNMP.

2.Move around the MIBs to view the UPS device information.

Set the Device OIDs

From the main menu, select Monitor: MIB values then Browse

MIB: SNMP.

1.Select a MIB variable you want to alter; click on it.

2.Enter the new value then click on Set.

3.Click on Start Query to view the changes.

Ping the SNMP Solo

1.Change active Window to Shell.

2.Type ping <IP address> and press <enter>.

Novell’s NetWare Management Station v.2.0

Compile the Device MIB

1.Copy the UPS MIB file from the DOS formatted diskette into the subdirectory

\nms\snmpmibs\current.

2.From the main menu, select Tools then SNMP MIB Compiler.

3.From the SNMP MIB Compiler box, select Compile.

26Configuring the NMS

Image 32

Contents Snmp Solo Limited Warranty Governing Law FCC ComplianceTrademarks Conventions Used In This GuideTable of Contents Appendix Snmp Solo Features IntroductionExample Network With Snmp Solo Snmp Solo Package Contents Snmp Solo PackageStatus LEDs Two 3.5 Diskettes Configuration CablePower Supply UPS Interface Cable System Requirements System Requirements Initial Installation Initial Installation Configuration Hardware adapter prior to configuring the deviceSet IP And Gateway Addresses And MIB System Group IP addressTripp Lite Configuration Set Access Controls Access ControlsSet Trap Receivers Trap Receivers Additional Setup Screen Additional Setup ScreenDisplay Settings Reset Configuration to Default To Save and ExitTelNet Options Telnet optionsUpload Firmware Exit Without SavingFinal Installation Verify the Snmp Solo OperationEstablish Network Communications Configuring the NMS General Network Management StationsPoll the Device OIDs From the Test Connectivity box SunConnect SunNet Manager Add Snmp Solo Object to the Management MapPoll the Device OIDs Appendix ReferenceCommunities IP AddressesSubnetting and Subnet Masks Class Value of First Network ID Host ID NumberGateways Routing and FilteringGlossary AgentOID Troubleshooting Plugged into their respective portsPlacing a Technical Support Call Computer SystemTechnical Support 773Reference Worksheet