Tripp Lite MT-SE-37/02 owner manual Establish Network Communications

Page 30

SNMP Solo

If the SNMP Solo detects three communication failures in a row, the red LED turns on and stays on until the SNMP Solo receives a successful communication from the UPS.

Establish Network Communications

1.PING SNMP Solo.

Issue a PING command from the NMS. If you do not get a response, check the SNMP Solo’s network connection and IP address.

2.Test the adapter with an NMS.

Perform a “get” command and a “set” command. If either command fails, check the SNMP Solo access controls. The manager must have read permission to execute a get command successfully and read/write permission to execute a set command successfully.

(See the Configuring the NMS section for a detailed discussion.)

Your SNMP Solo SNMP adapter is now installed and completely functional.

24Final Installation

Image 30

Contents Snmp Solo Limited Warranty Governing Law FCC ComplianceTrademarks Conventions Used In This GuideTable of Contents Appendix Snmp Solo Features IntroductionExample Network With Snmp Solo Snmp Solo Package Contents Snmp Solo PackageStatus LEDs Configuration Cable Power SupplyTwo 3.5 Diskettes UPS Interface Cable System Requirements System Requirements Initial Installation Initial Installation Configuration Hardware adapter prior to configuring the deviceSet IP And Gateway Addresses And MIB System Group IP addressTripp Lite Configuration Set Access Controls Access ControlsSet Trap Receivers Trap Receivers Additional Setup Screen Additional Setup ScreenDisplay Settings Reset Configuration to Default To Save and ExitTelNet Options Telnet optionsUpload Firmware Exit Without SavingFinal Installation Verify the Snmp Solo OperationEstablish Network Communications Configuring the NMS General Network Management StationsPoll the Device OIDs From the Test Connectivity box SunConnect SunNet Manager Add Snmp Solo Object to the Management MapPoll the Device OIDs Communities AppendixReference IP AddressesSubnetting and Subnet Masks Class Value of First Network ID Host ID NumberGateways Routing and FilteringGlossary AgentOID Troubleshooting Plugged into their respective portsPlacing a Technical Support Call Computer SystemTechnical Support 773Reference Worksheet