SNMP Solo
Set IP And Gateway Addresses And MIB System Group
To set the IP address, Gateway address, MIB system group, and other system configurations, type 1 at the prompt. The following screen displays:
| Figure 6 IP Address for the SNMP Solo and More |
|
|
NOTE: | The minimum requirement to operate SNMP Solo is to set |
| the IP address. |
| To enter values, enter the number of the option, type a |
| <space>, and enter the name. Press <enter>. Your new value |
| displays next to the field heading on the top of the screen. |
| If you want to return to the Main Menu, press 0 (zero) and press |
| <enter>. |
| For more information on IP addresses and net masks, see the |
| Reference section of the Appendix in this manual. |