HotWire Menus and Screens
Card Selection Screen
From the HotWire Chassis Main Menu, select Card Selection to display the status of any of the 18 cards present in the chassis by type and slot number. The Card Selection screen also displays general and interface status for each card.
The following figure illustrates the positional display of the card selection screen:
<card name> T M R e d1 d2 d3 d4 w1 w2 w3 w4
On the chassis display, the following information is shown.
NOTE:
If an option is not active, an underscore is shown in its place.
Position | Display | Description |
|
|
|
| <card type> | MCC |
|
|
|
1 | T (Test mode) | Card currently in test mode |
|
|
|
2 | M (Major alarm) | Major alarm present on card |
|
|
|
3 | R (Minor alarm) | Minor alarm present on card |
|
|
|
4 | e (Ethernet) | Status of Ethernet link (U=UP, D=Down, or |
|
| X=Disabled) |
|
|
|
5 | d1 (DSL)# | Status of DSL card Port 1 (U=UP, D=Down, |
|
| or X=Disabled, or H=Handshaking) |
|
|
|
6 | d2 (DSL)# | Status of DSL card Port 2 (U=UP, D=Down, |
|
| or X=Disabled, or H=Handshaking) |
|
|
|
November 1997 |