Paradyne 8540, 8546 manual Select Configuration → Snmp → Communities/Traps A-F-D

Configuring the HotWire DSLAM

Creating SNMP Community Strings and Authentication Failure Trap

Use this procedure to configure SNMP community strings and enable the Authentication Failure trap mechanism. For additional security, ensure that source validation is enabled. (See Appendix C, Checklist for Setting Up SNMP Features.)

"Procedure

To create SNMP community strings and authentication failure trap:

1.Select Configuration → SNMP → Communities/Traps (A-F-D).

2.Enter values for the following fields and press Return after each entry:

Field	Description	Input
Authentication Failure Trap	Determines whether to	Enable/Disable
	send a trap when a
	SNMP request
	community string does
	not match or when the
	password for a telnet
	session is incorrect.

Community Name

SNMP community string name.

Up to four unique community names per screen

Access	Permission that is	RO = Read Only
	granted for each	RW = Read/Write
	community.	NA = No Access
IP address and port	NMS system host IP	nnn.nnn.nnn.nnn
	address	format
Input Number	Number of port.	Default = 162

3.Confirm the save and press Ctrl-z to return to the Configuration → SNMP menu.

8000-A2-GB20-20 November 1997 4-9