Paradyne 8540, 8546 manual MCC Monitoring Physical Layer Screens, Physical Layer Options 1, Syslog

Monitoring the HotWire DSLAM

Table 7-1. Card Status Options (2 of 2)

Syslog B-A-C

Displays a timestamp sequential list of operational type errors (such as invalid IP addresses) by date and error. There is one logged error per line in a downward scrolling list.

MCC Monitoring Physical Layer Screens

Use the system information submenu of the Physical Layer screens to display read-only system information about physical ports.

"Procedure

To view the active ports list, Ethernet statistics, and HDLC bus statistics:

1.Follow this menu sequence: Monitoring → Physical Layer (B-B)

2.The Physical Layer menu appears. Select the submenu option as shown in Table 7-2 and press Return.

Table 7-2. Physical Layer Options (1 of 2)

Active List (Active Ports List) B-B-A

Displays a list of the current status of all the active ports (e1a =Ethernet,

s1b = backplane) in the card, such as the port number, port name, port type, MAC address, and status of the port (in use or disconnected).

Num ± Number of the port.

Name ± Name of the port.

Description ± Type of port.

MAC Address ± MAC address of the active port. (Internal dummy address is used for non-Ethernet ports.)

Status ± In-use or disconnected.

8000-A2-GB20-20 November 1997 7-3