Paradyne 8546, 8540 manual Card Status Options 1, Card Info System Information

Page 70

DSL Card Configuration

NOTE:

Only a user who logs on to the HotWire DSLAM with Administrative permission can configure the DSL card.

"Procedure

To configure card information, DNS setup, time/date, clear NVRAM, upload or download configuration set, download new firmware, or reset card:

1.Follow this menu sequence: Configuration → Card Status (A-A)

2.The Card Status menu appears. Enter the desired value on each selected screen and field as shown in Table 6-1 and press Return.

Table 6-1. Card Status Options (1 of 4)

Card Info (System Information)	A-A-A

Gives the user the ability to configure basic card-level information.

System Name ± 16 alphanumeric characters. Name assigned to the card.

System Contact ± 32 alphanumeric characters. Name or number of party responsible for card.

System Location ± 16 alphanumeric characters. Location assigned to the card.

Router ID ± nnn.nnn.nnn.nnn format. (This field is read only.) Diagnostic Domain IP address assigned to card by the MCC.

Router Subnet Mask ± nnn.nnn.nnn.nnn format. (This field is read only.)

Local Control Terminal Port Mode ± Standard/Extended (Default = Standard). Standard is for USA keyboards; Extended is for European keyboards.

Remote Control Terminal Port Mode ± Standard/Extended (Default = Standard). Standard is for USA keyboards; Extended is for European keyboards.

Telnet daemon tcp port ± 0±65536 (Default = 23). If you change this field, you need to do a card reset.

DNS Setup (Configure DNS)	A-A-B

Gives the user the ability to configure the access to DNS servers from which name to IP address translation requests are made.

DNS Servers ± Three entry fields in nnn.nnn.nnn.nnn format. Enter the primary Domain Name System Server address.

Default Domain Name ± 40 characters. Domain used for queries that are not fully qualified. For example, if the default domain name = paradyne.com and a telnet is attempted to reach a system called gemini, the card would query the DNS server for gemini.paradyne.com.

Time to wait for response ± 1±15 seconds (Default = 5). Enter the time to wait for a response.

Number of times to retry server ± 1±3 times (Default = 2). Enter the number of times to retry the server.

6-2

November 1997

8000-A2-GB20-20

Image 70

Contents Hotwire Dslam for 8540 and 8546 DSL Cards Copyright 1997 Paradyne Corporation All rights reserved Contents Initial Setup Instructions DSL Card Configuration Diagnostics and Troubleshooting Static Route Warning Messages Glossary Index About This Guide Document Purpose and Intended AudienceDocument Summary Section DescriptionProduct-Related Documents Section DescriptionHotWire Dslam System Description What is the HotWire DSLAM?Network Service Provider Central Office CO HotWire Dslam ComponentsCustomer Premises CP One Management Communications Controller MCC card Levels of Access FeaturesHotWire Dslam Software Functionality Configuring the System Monitoring the SystemTroubleshooting and Diagnostics HotWire Menus and Screens OverviewComponents of a HotWire Menu Menu and Screen FormatsComponents of a HotWire Screen HotWire 8800 MCC 8000 Commonly Used Navigation Keys Keys DefinitionHotWire Menus a Hierarchical View HotWire Chassis Main MenuDiagnostics HotWire ± MCC MenuHotWire-MCC ApplicationsCard Status ConfigurationPorts Users InterfacesPhysical Layer MonitoringNetwork Protocol HotWire ± DSL Menu Ports IP Router Dhcp RelayCard/CPE Status PPP StatsReviewing the Levels of Access Operator Login ScreenCard Selection Screen Position Display DescriptionAccessing the HotWire ± MCC Menu ProcedureManually Logging Off Exiting From the SystemAutomatically Logging Off Initial Setup Instructions Accessing the System for the First TimeInitial Setup Instructions Additional Setup Instructions Chassis Information Screen Whats Next?Field Input Description Configuring the HotWire Dslam Port Naming ConventionConfiguring MCC Cards, DSL Cards, and RTUs For the Management Domain See Perform taskFor each Service Domain See Perform task MCC Card DCE ManagerServer 10BT DCE Manager Router DSL CardService Domain ISP RouterSetting Time and Date Screen Field Description InputAssigning IP Addresses to the Backplane on the MCC Card NetAssigning IP Addresses to the DSL Cards on the MCC Card Select Configuration → Snmp → Communities/Traps A-F-D Creating the Default Route Select Configuration → IP Router→ StaticRoutes A-E-AResetting the MCC Card Selecting a DSL Card to ConfigureConfiguring 5446 RTU IP Host Addresses on the 8546 DSL Card HostConfiguring a Static Route to an NMS on each DSL Card Select Configuration → IP Router → StaticRoutes A-E-AAssigning IP Addresses to the DSL Card LAN Resetting the DSL Card Configuring Static Routes to End Users on each DSL Card Configuring Dhcp Relay Agent dynamic addressing Creating Default Route or Source Route on the DSL MCC Card Configuration MCC Configuration Card Status ScreensCard Status Menu Options 1 DNS Setup Configure DNSCard Info System Information Card Status Menu Options 2 Download Code Download Code and Apply Download Card Reset Reset SystemCard Status Menu Options 3 Apply DownloadInterfaces Menu Options 1 MCC Configuration Ports Screens Reserved for Future UseMCC Configuration Interfaces Screens General InterfacesBase Subnet Mask ± nnn.nnn.nnn.nnn format Interfaces Menu Options 2IP Network Input Filter ± Optional Output Filter ± OptionalUsers Configure Account MCC Configuration Users ScreensUsers Menu Options Static Routes MCC Configuration IP Router ScreensIP Router Menu Options 1 Martian NetworksIP Router Menu Options 2 Filter TableIP Router Menu Options 3 IP Router Filters IP Filter ConfigurationDelete Rule ± Yes/No Go to Rule Number ± Default = Destination Address ± nnn.nnn.nnn.nnn formatIP Address/Host Name ± nnn.nnn.nnn.nnn format IP Router Menu Options 4Parameters a Delete Entry Delete ARP Entry CSecurity Snmp Security MCC Configuration Snmp ScreensSnmp Menu Options 1 Logical Entities Snmp Logical EntitiesSnmp Menu Options 2 Communities/Traps Snmp Communities/TrapsMCC DSL Cards Screen DSL OptionsDSL Card Configuration DSL Configuration Card Status ScreensCard Status Options 1 Card Status Options 2 Card Status Options 3 Card Status Menu Options 4 Ethernet Port DSL Configuration Ports ScreensPorts Options 1 DSL Ports DSL ParametersPorts Options 2 DSL Configuration Interfaces Screens Interfaces Options 1Interfaces Options 2 Negotiate Options Echo Policy Default =Interfaces Options 3 Link OptionsDSL Configuration Users Screens Users OptionsDSL Configuration IP Router Screens IP Router Options 1IP Router Options 2 IP Router Options 3 Delete Rule ± Yes/No Go to Next Rule ± Yes/NoIP Router Options 4 Delete ARP Entry Delete ARP EntryCDSL Configuration Snmp Screens Snmp Options 1Snmp Options 2 DSL Configuration Dhcp Relay Screens Servers 1±8 and Servers 9±16 B or C Dhcp Relay OptionsDomain Names Servers 1±8 BRTU Information DSL Configuration RTU ScreensRTU Information Monitoring the HotWire Dslam MCC Monitoring Menu TreeMCC Monitoring Card Status Screens Login HistoryCard Info General Card Information Syslog MCC Monitoring Physical Layer ScreensPhysical Layer Options 1 Active List Active Ports ListEther Statistics Ethernet Statistics Physical Layer Options 2Hdlc Bus Stats Hdlc Bus Statistics Active List Active Interfaces List MCC Monitoring Interfaces ScreensInterfaces Options Status Interface StatusNetwork Protocol Options 1 MCC Network Protocol ScreensSocket Statistics Network Protocol Options 2 UDP StatisticsNetwork Protocol Options 3 TCP Data Stats TCP StatisticsTCP Connection Statistics Network Protocol Options 4IP Statistics Icmp Statistics Icmp Packet Statistics Network Protocol Options 5Snmp Statistics Network Protocol Options 6 Snmp Authentication StatisticsHdlc Stats Hdlc Statistics Routing Table MCC IP Router ScreensRouting Table Screen Routing Information Window ARP TableDSL Monitoring Menu Tree DSL Monitoring Card Status ScreensCard Status Options DSL Monitoring Physical Layer Screens Physical Layer Options 2 Physical Layer Options 3 DSL Link Perf DSL Link Performance Summary Physical Layer Options 4DSL Perf Stats DSL Performance Stats Physical Layer Options 5 DSL Error StatsDSL Xmit Status DSL Transmit Stats DSL Monitoring Interfaces Screens DSL Network Protocol Screens Network Protocol Options 2 TCP Data Stats TCP Data Statistics Network Protocol Options 4 Network Protocol Options 5 Hdlc Statistics Hdlc Statistics LCP Stats PPP H B Network Protocol Options 7PPP Stats General H a Ipcp General Stats PPP H CDSL IP Router Screens 10. IP Router Options 110. IP Router Options 2 Routing Table Routing Information Window10. IP Router Options 3 11. RTU Information Diagnostics and Troubleshooting Applications ScreensTraceRoute Applications OptionsPing MCC and DSL Telnet MCC Card onlyDiagnostic Screens Selftest Diagnostics OptionsAlarms Card Alarms Packet Echo TestTroubleshooting Model # M R D U X XChecking Alarms Major Alarms 1 Failure Type ActionMajor Alarms 2 Failure Type Action Ethernet port 1. Check cable connections to the DslamMargin Minor Alarms 1 Failure Type ActionThreshold Failure Type Action Error RateLink Down Network Problems Slow Performance Excessive CollisionsNo Snmp Connection Established Filters Not WorkingNo PPP Traffic IP Routing ProblemsNo Response at Start Up Large Number of Traps System Does Not Recognize New DSL CardsCannot Communicate with Interface Unexpected Subnet Data Cannot Upload Configurations to a Unix ServerCannot Communicate with 5446 RTU from MCC Card MCC User Accounts For Telnet Terminal Access to MCC Card Reboot Card MCC DSL User AccountsReboot Card DSL MCC Snmp Community Strings and Authentication Failure Trap Checklist for Setting Up Snmp FeaturesSetting Up Snmp Features Management System Source Validation for MCCEnable/Disable Endpoint Security to 5446 RTU DSL Snmp Community Strings and Authentication Failure TrapEnable DSL Port Traps Management System Source Validation for DSL cardsDownload Code Download Code and ApplyScenario One Fully Operational System Apply Download Scenario Two Download Only SystemNavigation Keys Traps Event Trap Class CommentTraps Traps MCC card sends the following traps Standard Traps RTU Related TrapsEnterprise-Specific Traps Accessing 5446 RTU MIBs RTU SetupRTU Overview IP Injection Tool Network Management SystemsMIB Browser Techniques IP Injection MIB OIDUsing the null entry RTU IP Configuration Table IP and Device MIBs SupportedAdditional pdn-common MIBs Supported ± MaskStatic Route Warning Messages Message MeaningGlossary Filter EthernetEthernet Address Gateway addressMultiplex MarginMCC Card PacketS1b RouterRouting Table S1cIndex NumbersIN-2 IN-3

Related manuals

Manual 132 pages 42.56 Kb

Manual 12 pages 4.86 Kb