Paradyne 8546, 8540 manual Assigning IP Addresses to the DSL Card LAN

Page 50

Configuring the HotWire DSLAM

Assigning IP Addresses to the DSL Card LAN

Use this procedure to give DSL cards a LAN Interface IP address in each

Network Service Provider (NSP) domain supported by those cards.

"Procedure

To assign IP addresses to the DSL Card LAN:

1.Select Configuration → Interfaces → IP Network (A-C-B).

2.Enter values for the following fields and press Return after each entry:

Field

Description

Input

IP Interface	Name of the interface.	e1a (Ethernet port)

IP Address (for	IP address for each DSL card	nnn.nnn.nnn.nnn format.
each 8540 and	in the system. This address	(Subnet is predetermined ±
8546 DSL card)	must be different that the	you can enter the host
	management domain IP	number.)
	address.

Subnet Mask	Associated subnet mask for	nnn.nnn.nnn.nnn format
	the specified destination IP
	address.

Route to Peer	Routing method used to get	Net
(Field does not	to peer (i.e., host or net).
(Field does not
appear on e1a and
Model 8540.)

*Enter the network/subnetwork portion of the Base IP address, with 0 for the host portion so that the Peer is the entire subnet.

In addition, the following fields also appear on the screen. These fields can be used to customize your application.

Field	Description	Input

Input Filter	Prevents packets from	Blank to disable.
	entering the DSL card
	through a specified interface.

Output Filter

Prevents packets from going out of the DSL card through a specified interface.

Blank to disable.

3. Press Ctrl-z to return to the Configuration → Interfaces menu.

4-14

November 1997

8000-A2-GB20-20

Image 50

Contents Hotwire Dslam for 8540 and 8546 DSL Cards Copyright 1997 Paradyne Corporation All rights reserved Contents Initial Setup Instructions DSL Card Configuration Diagnostics and Troubleshooting Static Route Warning Messages Glossary Index About This Guide Document Purpose and Intended AudienceDocument Summary Section DescriptionProduct-Related Documents Section DescriptionHotWire Dslam System Description What is the HotWire DSLAM?Customer Premises CP HotWire Dslam ComponentsNetwork Service Provider Central Office CO One Management Communications Controller MCC card HotWire Dslam Software Functionality FeaturesLevels of Access Configuring the System Monitoring the SystemTroubleshooting and Diagnostics HotWire Menus and Screens OverviewComponents of a HotWire Menu Menu and Screen FormatsComponents of a HotWire Screen HotWire 8800 MCC 8000 Commonly Used Navigation Keys Keys DefinitionHotWire Menus a Hierarchical View HotWire Chassis Main MenuDiagnostics HotWire ± MCC MenuHotWire-MCC ApplicationsCard Status ConfigurationPorts Users InterfacesNetwork Protocol MonitoringPhysical Layer HotWire ± DSL Menu Ports IP Router Dhcp RelayCard/CPE Status PPP StatsReviewing the Levels of Access Operator Login ScreenCard Selection Screen Position Display DescriptionAccessing the HotWire ± MCC Menu ProcedureAutomatically Logging Off Exiting From the SystemManually Logging Off Initial Setup Instructions Accessing the System for the First TimeInitial Setup Instructions Additional Setup Instructions Field Input Description Whats Next?Chassis Information Screen Configuring the HotWire Dslam Port Naming ConventionConfiguring MCC Cards, DSL Cards, and RTUs For the Management Domain See Perform taskFor each Service Domain See Perform task MCC Card DCE ManagerServer 10BT DCE Manager Router DSL CardService Domain ISP RouterSetting Time and Date Screen Field Description InputAssigning IP Addresses to the Backplane on the MCC Card NetAssigning IP Addresses to the DSL Cards on the MCC Card Select Configuration → Snmp → Communities/Traps A-F-D Creating the Default Route Select Configuration → IP Router→ StaticRoutes A-E-AResetting the MCC Card Selecting a DSL Card to ConfigureConfiguring 5446 RTU IP Host Addresses on the 8546 DSL Card HostConfiguring a Static Route to an NMS on each DSL Card Select Configuration → IP Router → StaticRoutes A-E-AAssigning IP Addresses to the DSL Card LAN Resetting the DSL Card Configuring Static Routes to End Users on each DSL Card Configuring Dhcp Relay Agent dynamic addressing Creating Default Route or Source Route on the DSL MCC Card Configuration MCC Configuration Card Status ScreensCard Info System Information DNS Setup Configure DNSCard Status Menu Options 1 Card Status Menu Options 2 Download Code Download Code and Apply Download Card Reset Reset SystemCard Status Menu Options 3 Apply DownloadInterfaces Menu Options 1 MCC Configuration Ports Screens Reserved for Future UseMCC Configuration Interfaces Screens General InterfacesBase Subnet Mask ± nnn.nnn.nnn.nnn format Interfaces Menu Options 2IP Network Input Filter ± Optional Output Filter ± OptionalUsers Menu Options MCC Configuration Users ScreensUsers Configure Account Static Routes MCC Configuration IP Router ScreensIP Router Menu Options 1 Martian NetworksIP Router Menu Options 2 Filter TableIP Router Menu Options 3 IP Router Filters IP Filter ConfigurationDelete Rule ± Yes/No Go to Rule Number ± Default = Destination Address ± nnn.nnn.nnn.nnn formatIP Address/Host Name ± nnn.nnn.nnn.nnn format IP Router Menu Options 4Parameters a Delete Entry Delete ARP Entry CSecurity Snmp Security MCC Configuration Snmp ScreensSnmp Menu Options 1 Logical Entities Snmp Logical EntitiesSnmp Menu Options 2 Communities/Traps Snmp Communities/TrapsMCC DSL Cards Screen DSL OptionsDSL Card Configuration DSL Configuration Card Status ScreensCard Status Options 1 Card Status Options 2 Card Status Options 3 Card Status Menu Options 4 Ethernet Port DSL Configuration Ports ScreensPorts Options 1 DSL Ports DSL ParametersPorts Options 2 DSL Configuration Interfaces Screens Interfaces Options 1Interfaces Options 2 Negotiate Options Echo Policy Default =Interfaces Options 3 Link OptionsDSL Configuration Users Screens Users OptionsDSL Configuration IP Router Screens IP Router Options 1IP Router Options 2 IP Router Options 3 Delete Rule ± Yes/No Go to Next Rule ± Yes/NoIP Router Options 4 Delete ARP Entry Delete ARP EntryCDSL Configuration Snmp Screens Snmp Options 1Snmp Options 2 DSL Configuration Dhcp Relay Screens Servers 1±8 and Servers 9±16 B or C Dhcp Relay OptionsDomain Names Servers 1±8 BRTU Information DSL Configuration RTU ScreensRTU Information Monitoring the HotWire Dslam MCC Monitoring Menu TreeCard Info General Card Information Login HistoryMCC Monitoring Card Status Screens Syslog MCC Monitoring Physical Layer ScreensPhysical Layer Options 1 Active List Active Ports ListHdlc Bus Stats Hdlc Bus Statistics Physical Layer Options 2Ether Statistics Ethernet Statistics Active List Active Interfaces List MCC Monitoring Interfaces ScreensInterfaces Options Status Interface StatusSocket Statistics MCC Network Protocol ScreensNetwork Protocol Options 1 Network Protocol Options 2 UDP StatisticsNetwork Protocol Options 3 TCP Data Stats TCP StatisticsIP Statistics Network Protocol Options 4TCP Connection Statistics Snmp Statistics Network Protocol Options 5Icmp Statistics Icmp Packet Statistics Hdlc Stats Hdlc Statistics Snmp Authentication StatisticsNetwork Protocol Options 6 Routing Table Screen MCC IP Router ScreensRouting Table Routing Information Window ARP TableDSL Monitoring Menu Tree DSL Monitoring Card Status ScreensCard Status Options DSL Monitoring Physical Layer Screens Physical Layer Options 2 Physical Layer Options 3 DSL Perf Stats DSL Performance Stats Physical Layer Options 4DSL Link Perf DSL Link Performance Summary DSL Xmit Status DSL Transmit Stats DSL Error StatsPhysical Layer Options 5 DSL Monitoring Interfaces Screens DSL Network Protocol Screens Network Protocol Options 2 TCP Data Stats TCP Data Statistics Network Protocol Options 4 Network Protocol Options 5 Hdlc Statistics Hdlc Statistics LCP Stats PPP H B Network Protocol Options 7PPP Stats General H a Ipcp General Stats PPP H CDSL IP Router Screens 10. IP Router Options 110. IP Router Options 2 Routing Table Routing Information Window10. IP Router Options 3 11. RTU Information Diagnostics and Troubleshooting Applications ScreensTraceRoute Applications OptionsPing MCC and DSL Telnet MCC Card onlyDiagnostic Screens Selftest Diagnostics OptionsAlarms Card Alarms Packet Echo TestTroubleshooting Model # M R D U X XChecking Alarms Major Alarms 1 Failure Type ActionMajor Alarms 2 Failure Type Action Ethernet port 1. Check cable connections to the DslamThreshold Minor Alarms 1 Failure Type ActionMargin Link Down Error RateFailure Type Action Network Problems Slow Performance Excessive CollisionsNo Snmp Connection Established Filters Not WorkingNo Response at Start Up IP Routing ProblemsNo PPP Traffic Cannot Communicate with Interface System Does Not Recognize New DSL CardsLarge Number of Traps Cannot Communicate with 5446 RTU from MCC Card Cannot Upload Configurations to a Unix ServerUnexpected Subnet Data MCC User Accounts For Telnet Terminal Access to MCC Card Reboot Card MCC DSL User AccountsReboot Card DSL MCC Snmp Community Strings and Authentication Failure Trap Checklist for Setting Up Snmp FeaturesSetting Up Snmp Features Management System Source Validation for MCCEnable/Disable Endpoint Security to 5446 RTU DSL Snmp Community Strings and Authentication Failure TrapEnable DSL Port Traps Management System Source Validation for DSL cardsScenario One Fully Operational System Download Code and ApplyDownload Code Apply Download Scenario Two Download Only SystemNavigation Keys Traps Event Trap Class CommentTraps Traps MCC card sends the following traps Enterprise-Specific Traps RTU Related TrapsStandard Traps RTU Overview RTU SetupAccessing 5446 RTU MIBs IP Injection Tool Network Management SystemsMIB Browser Techniques IP Injection MIB OIDUsing the null entry RTU IP Configuration Table IP and Device MIBs SupportedAdditional pdn-common MIBs Supported ± MaskStatic Route Warning Messages Message MeaningGlossary Filter EthernetEthernet Address Gateway addressMultiplex MarginMCC Card PacketS1b RouterRouting Table S1cIndex NumbersIN-2 IN-3

Related manuals

Manual 132 pages 42.56 Kb

Manual 12 pages 4.86 Kb