Paradyne 8546, 8540 manual Creating Default Route or Source Route on the DSL

Configuring the HotWire DSLAM

Creating Default Route or Source Route on the DSL

Use this procedure to create a default route or source route for each DSL card (upstream direction). You can create up to 16 default or source routes per DSL card.

"Procedure

To create default routes or source routes on the DSL:

1.Select Configuration → IP Router → Static_Routes (A-E-A).

2.Press Return on the Item 0 field to add a new record.

3.Enter values for the following fields and press Return after each entry.

Field

Description

Input

Host/Net	Destination of the route.	0.0.0.0 to indicate the
		default route
Subnet Mask	Associated subnet mask	nnn.nnn.nnn.nnn format
	for the specified
	destination IP address.
Next Hop	IP address of the next hop	nnn.nnn.nnn.nnn format
	device for the specified
	destination.
Pref (Preference)	Measure of how preferable	1
	one route is to another, if
	you have two routes going
	to the same destination.
	(The lower the number, the
	more preferable the route.)
	This route is compared to
	other routes for the same
	destination address.
S/D (Source/Destination)	Source or destination route	Default = Dst
	type.
PA (Proxy ARP)	Router answers ARP	Default = No
	requests intended for
	another machine.

4.Confirm the save and press Ctrl-z to return to the Configuration → IP Router menu.

4-18 November 1997 8000-A2-GB20-20