Paradyne 8540, 8546 manual Snmp Options 2, Communities/Traps Snmp Communities/Traps

Page 85

DSL Card Configuration

Table 6-6. SNMP Options (2 of 2)

Communities/Traps (SNMP Communities/Traps)	A-F-C

Gives the user the ability to enable the Authentication Failure Trap Mechanism, stores SNMP Community string names for the DSL card, and stores NMS host IP addresses to which the DSLAM sends trap messages.

NOTE: All traps from the DSL card go to the MCC before being forwarded to NMS.

It also lets the user configure four communities with three trap destinations each. This can be for a total of up to 12 destinations.

Authentication Failure Trap ± Enable to send a trap when a SNMP request community string does not match or when the password for a Telnet session is incorrect.

Community Name ± 32 characters, up to four unique entries per screen. Default names are public (ro), mcc (rw), nms (rw), nms-2 (ro).

Access ± ReadOnly(ro)/ReadWrite(rw)/NoAccess(na), up to four entries per screen.

IP Address ± nnn.nnn.nnn.nnn format. Enter NMS system host address.

Input Number (port) ± nnn format. Enter NMS system port number.

Send Traps ± Set to E to enable. Set to D to disable.

8000-A2-GB20-20

November 1997

6-17

Image 85

Contents Hotwire Dslam for 8540 and 8546 DSL Cards Copyright 1997 Paradyne Corporation All rights reserved Contents Initial Setup Instructions DSL Card Configuration Diagnostics and Troubleshooting Static Route Warning Messages Glossary Index Document Purpose and Intended Audience About This GuideSection Description Document SummarySection Description Product-Related DocumentsWhat is the HotWire DSLAM? HotWire Dslam System DescriptionNetwork Service Provider Central Office CO HotWire Dslam ComponentsCustomer Premises CP One Management Communications Controller MCC card Levels of Access FeaturesHotWire Dslam Software Functionality Monitoring the System Configuring the SystemTroubleshooting and Diagnostics Overview HotWire Menus and ScreensMenu and Screen Formats Components of a HotWire MenuComponents of a HotWire Screen HotWire 8800 MCC 8000 Keys Definition Commonly Used Navigation KeysHotWire Chassis Main Menu HotWire Menus a Hierarchical ViewHotWire-MCC HotWire ± MCC MenuDiagnostics ApplicationsPorts Users ConfigurationCard Status InterfacesPhysical Layer MonitoringNetwork Protocol HotWire ± DSL Menu IP Router Dhcp Relay PortsPPP Stats Card/CPE StatusOperator Login Screen Reviewing the Levels of AccessPosition Display Description Card Selection ScreenProcedure Accessing the HotWire ± MCC MenuManually Logging Off Exiting From the SystemAutomatically Logging Off Accessing the System for the First Time Initial Setup InstructionsInitial Setup Instructions Additional Setup Instructions Chassis Information Screen Whats Next?Field Input Description Port Naming Convention Configuring the HotWire DslamFor the Management Domain See Perform task Configuring MCC Cards, DSL Cards, and RTUsFor each Service Domain See Perform task Server 10BT DCE Manager Router DCE ManagerMCC Card DSL CardISP Router Service DomainField Description Input Setting Time and Date ScreenNet Assigning IP Addresses to the Backplane on the MCC CardAssigning IP Addresses to the DSL Cards on the MCC Card Select Configuration → Snmp → Communities/Traps A-F-D Select Configuration → IP Router→ StaticRoutes A-E-A Creating the Default RouteSelecting a DSL Card to Configure Resetting the MCC CardHost Configuring 5446 RTU IP Host Addresses on the 8546 DSL CardSelect Configuration → IP Router → StaticRoutes A-E-A Configuring a Static Route to an NMS on each DSL CardAssigning IP Addresses to the DSL Card LAN Resetting the DSL Card Configuring Static Routes to End Users on each DSL Card Configuring Dhcp Relay Agent dynamic addressing Creating Default Route or Source Route on the DSL MCC Configuration Card Status Screens MCC Card ConfigurationCard Status Menu Options 1 DNS Setup Configure DNSCard Info System Information Card Status Menu Options 2 Card Status Menu Options 3 Card Reset Reset SystemDownload Code Download Code and Apply Download Apply DownloadMCC Configuration Interfaces Screens MCC Configuration Ports Screens Reserved for Future UseInterfaces Menu Options 1 General InterfacesIP Network Interfaces Menu Options 2Base Subnet Mask ± nnn.nnn.nnn.nnn format Input Filter ± Optional Output Filter ± OptionalUsers Configure Account MCC Configuration Users ScreensUsers Menu Options IP Router Menu Options 1 MCC Configuration IP Router ScreensStatic Routes Martian NetworksFilter Table IP Router Menu Options 2Delete Rule ± Yes/No Go to Rule Number ± Default = IP Router Filters IP Filter ConfigurationIP Router Menu Options 3 Destination Address ± nnn.nnn.nnn.nnn formatParameters a IP Router Menu Options 4IP Address/Host Name ± nnn.nnn.nnn.nnn format Delete Entry Delete ARP Entry CSnmp Menu Options 1 MCC Configuration Snmp ScreensSecurity Snmp Security Logical Entities Snmp Logical EntitiesCommunities/Traps Snmp Communities/Traps Snmp Menu Options 2DSL Options MCC DSL Cards ScreenDSL Configuration Card Status Screens DSL Card ConfigurationCard Status Options 1 Card Status Options 2 Card Status Options 3 Card Status Menu Options 4 Ports Options 1 DSL Configuration Ports ScreensEthernet Port DSL Ports DSL ParametersPorts Options 2 Interfaces Options 1 DSL Configuration Interfaces ScreensInterfaces Options 2 Interfaces Options 3 Echo Policy Default =Negotiate Options Link OptionsUsers Options DSL Configuration Users ScreensIP Router Options 1 DSL Configuration IP Router ScreensIP Router Options 2 Delete Rule ± Yes/No Go to Next Rule ± Yes/No IP Router Options 3Delete ARP Entry Delete ARP EntryC IP Router Options 4Snmp Options 1 DSL Configuration Snmp ScreensSnmp Options 2 DSL Configuration Dhcp Relay Screens Domain Names Dhcp Relay OptionsServers 1±8 and Servers 9±16 B or C Servers 1±8 BRTU Information DSL Configuration RTU ScreensRTU Information MCC Monitoring Menu Tree Monitoring the HotWire DslamMCC Monitoring Card Status Screens Login HistoryCard Info General Card Information Physical Layer Options 1 MCC Monitoring Physical Layer ScreensSyslog Active List Active Ports ListEther Statistics Ethernet Statistics Physical Layer Options 2Hdlc Bus Stats Hdlc Bus Statistics Interfaces Options MCC Monitoring Interfaces ScreensActive List Active Interfaces List Status Interface StatusNetwork Protocol Options 1 MCC Network Protocol ScreensSocket Statistics UDP Statistics Network Protocol Options 2TCP Data Stats TCP Statistics Network Protocol Options 3TCP Connection Statistics Network Protocol Options 4IP Statistics Icmp Statistics Icmp Packet Statistics Network Protocol Options 5Snmp Statistics Network Protocol Options 6 Snmp Authentication StatisticsHdlc Stats Hdlc Statistics Routing Table MCC IP Router ScreensRouting Table Screen ARP Table Routing Information WindowDSL Monitoring Card Status Screens DSL Monitoring Menu TreeCard Status Options DSL Monitoring Physical Layer Screens Physical Layer Options 2 Physical Layer Options 3 DSL Link Perf DSL Link Performance Summary Physical Layer Options 4DSL Perf Stats DSL Performance Stats Physical Layer Options 5 DSL Error StatsDSL Xmit Status DSL Transmit Stats DSL Monitoring Interfaces Screens DSL Network Protocol Screens Network Protocol Options 2 TCP Data Stats TCP Data Statistics Network Protocol Options 4 Network Protocol Options 5 Hdlc Statistics Hdlc Statistics PPP Stats General H a Network Protocol Options 7LCP Stats PPP H B Ipcp General Stats PPP H C10. IP Router Options 1 DSL IP Router ScreensRouting Table Routing Information Window 10. IP Router Options 210. IP Router Options 3 11. RTU Information Applications Screens Diagnostics and TroubleshootingPing MCC and DSL Applications OptionsTraceRoute Telnet MCC Card onlyDiagnostic Screens Alarms Card Alarms Diagnostics OptionsSelftest Packet Echo TestModel # M R D U X X TroubleshootingMajor Alarms 1 Failure Type Action Checking AlarmsEthernet port 1. Check cable connections to the Dslam Major Alarms 2 Failure Type ActionMargin Minor Alarms 1 Failure Type ActionThreshold Failure Type Action Error RateLink Down Network Problems Excessive Collisions Slow PerformanceFilters Not Working No Snmp Connection EstablishedNo PPP Traffic IP Routing ProblemsNo Response at Start Up Large Number of Traps System Does Not Recognize New DSL CardsCannot Communicate with Interface Unexpected Subnet Data Cannot Upload Configurations to a Unix ServerCannot Communicate with 5446 RTU from MCC Card MCC User Accounts For Telnet Terminal Access to MCC Card DSL User Accounts Reboot Card MCCReboot Card DSL Setting Up Snmp Features Checklist for Setting Up Snmp FeaturesMCC Snmp Community Strings and Authentication Failure Trap Management System Source Validation for MCCEnable DSL Port Traps DSL Snmp Community Strings and Authentication Failure TrapEnable/Disable Endpoint Security to 5446 RTU Management System Source Validation for DSL cardsDownload Code Download Code and ApplyScenario One Fully Operational System Scenario Two Download Only System Apply DownloadNavigation Keys Event Trap Class Comment TrapsTraps Traps MCC card sends the following traps Standard Traps RTU Related TrapsEnterprise-Specific Traps Accessing 5446 RTU MIBs RTU SetupRTU Overview Network Management Systems IP Injection ToolIP Injection MIB OID MIB Browser TechniquesUsing the null entry IP and Device MIBs Supported RTU IP Configuration Table± Mask Additional pdn-common MIBs SupportedMessage Meaning Static Route Warning MessagesGlossary Ethernet Address EthernetFilter Gateway addressMCC Card MarginMultiplex PacketRouting Table RouterS1b S1cNumbers IndexIN-2 IN-3

Related manuals

Manual 132 pages 42.56 Kb

Manual 12 pages 4.86 Kb