Paradyne 8546, 8540 manual DSL Configuration Ports Screens, Ports Options 1, Ethernet Port

Page 74

DSL Card Configuration

DSL Configuration Ports Screens

Use the system information submenu of the Ports screens to display the DSL

Ports screen.

"Procedure

To configure DSL ports:

1.Follow this menu sequence: Configuration → Ports (A-B)

2.The Ports menu appears. Enter the desired value on each selected screen and field and press Return.

Table 6-2. Ports Options (1 of 2)

Ethernet Port	A-B-A

Gives the user the ability to configure the Ethernet Port.

Port Name ± Enter the port name (up to 7 characters).

Full Duplex ± Enable/Disable. (Default = Disable)

Function ± Edit/Reset. Select Reset to have changes become active.

DSL Ports (DSL Parameters)	A-B-B

Gives the user the ability to configure the operational and alarm parameters of the DSL ports. Each DSL port is configured separately.

Action ± Edit/Reset. Edit to configure the DSL ports, Reset to reset the port and make changes active.

Port # ± Enter port 1 to 4. (Default = 0)

Port Desc ± 40 characters (User Name, telephone number, circuit id of DSL loop, etc.).

Tx Power Attenuation ± 0db, ±3db, ±6db. Enter the rate that allows you to reduce the transmit power by: ±3 or ±6 db. (Default = 0db)

Startup Margin ± The Startup Margin field is used to determine the quality of the connection of the upstream link on system startup. It is used in conjunction with the adaptive speed fields to determine the initial line speeds of the DSL link. The value is between ±3 and 9. In Adaptive Mode, if the margin falls below SM, the DSL link will be restarted at a slower speed. If the calculated margin of the next speed is greater than SM by 3db, the speed will increase. Enter ±3 to 9. (Default = 3)

6-6

November 1997

8000-A2-GB20-20

Image 74

Contents Hotwire Dslam for 8540 and 8546 DSL Cards Copyright 1997 Paradyne Corporation All rights reserved Contents Initial Setup Instructions DSL Card Configuration Diagnostics and Troubleshooting Static Route Warning Messages Glossary Index About This Guide Document Purpose and Intended AudienceDocument Summary Section DescriptionProduct-Related Documents Section DescriptionHotWire Dslam System Description What is the HotWire DSLAM?Customer Premises CP HotWire Dslam ComponentsNetwork Service Provider Central Office CO One Management Communications Controller MCC card HotWire Dslam Software Functionality FeaturesLevels of Access Configuring the System Monitoring the SystemTroubleshooting and Diagnostics HotWire Menus and Screens OverviewComponents of a HotWire Menu Menu and Screen FormatsComponents of a HotWire Screen HotWire 8800 MCC 8000 Commonly Used Navigation Keys Keys DefinitionHotWire Menus a Hierarchical View HotWire Chassis Main MenuDiagnostics HotWire ± MCC MenuHotWire-MCC ApplicationsCard Status ConfigurationPorts Users InterfacesNetwork Protocol MonitoringPhysical Layer HotWire ± DSL Menu Ports IP Router Dhcp RelayCard/CPE Status PPP StatsReviewing the Levels of Access Operator Login ScreenCard Selection Screen Position Display DescriptionAccessing the HotWire ± MCC Menu ProcedureAutomatically Logging Off Exiting From the SystemManually Logging Off Initial Setup Instructions Accessing the System for the First TimeInitial Setup Instructions Additional Setup Instructions Field Input Description Whats Next?Chassis Information Screen Configuring the HotWire Dslam Port Naming ConventionConfiguring MCC Cards, DSL Cards, and RTUs For the Management Domain See Perform taskFor each Service Domain See Perform task MCC Card DCE ManagerServer 10BT DCE Manager Router DSL CardService Domain ISP RouterSetting Time and Date Screen Field Description InputAssigning IP Addresses to the Backplane on the MCC Card NetAssigning IP Addresses to the DSL Cards on the MCC Card Select Configuration → Snmp → Communities/Traps A-F-D Creating the Default Route Select Configuration → IP Router→ StaticRoutes A-E-AResetting the MCC Card Selecting a DSL Card to ConfigureConfiguring 5446 RTU IP Host Addresses on the 8546 DSL Card HostConfiguring a Static Route to an NMS on each DSL Card Select Configuration → IP Router → StaticRoutes A-E-AAssigning IP Addresses to the DSL Card LAN Resetting the DSL Card Configuring Static Routes to End Users on each DSL Card Configuring Dhcp Relay Agent dynamic addressing Creating Default Route or Source Route on the DSL MCC Card Configuration MCC Configuration Card Status ScreensCard Info System Information DNS Setup Configure DNSCard Status Menu Options 1 Card Status Menu Options 2 Download Code Download Code and Apply Download Card Reset Reset SystemCard Status Menu Options 3 Apply DownloadInterfaces Menu Options 1 MCC Configuration Ports Screens Reserved for Future UseMCC Configuration Interfaces Screens General InterfacesBase Subnet Mask ± nnn.nnn.nnn.nnn format Interfaces Menu Options 2IP Network Input Filter ± Optional Output Filter ± OptionalUsers Menu Options MCC Configuration Users ScreensUsers Configure Account Static Routes MCC Configuration IP Router ScreensIP Router Menu Options 1 Martian NetworksIP Router Menu Options 2 Filter TableIP Router Menu Options 3 IP Router Filters IP Filter ConfigurationDelete Rule ± Yes/No Go to Rule Number ± Default = Destination Address ± nnn.nnn.nnn.nnn formatIP Address/Host Name ± nnn.nnn.nnn.nnn format IP Router Menu Options 4Parameters a Delete Entry Delete ARP Entry CSecurity Snmp Security MCC Configuration Snmp ScreensSnmp Menu Options 1 Logical Entities Snmp Logical EntitiesSnmp Menu Options 2 Communities/Traps Snmp Communities/TrapsMCC DSL Cards Screen DSL OptionsDSL Card Configuration DSL Configuration Card Status ScreensCard Status Options 1 Card Status Options 2 Card Status Options 3 Card Status Menu Options 4 Ethernet Port DSL Configuration Ports ScreensPorts Options 1 DSL Ports DSL ParametersPorts Options 2 DSL Configuration Interfaces Screens Interfaces Options 1Interfaces Options 2 Negotiate Options Echo Policy Default =Interfaces Options 3 Link OptionsDSL Configuration Users Screens Users OptionsDSL Configuration IP Router Screens IP Router Options 1IP Router Options 2 IP Router Options 3 Delete Rule ± Yes/No Go to Next Rule ± Yes/NoIP Router Options 4 Delete ARP Entry Delete ARP EntryCDSL Configuration Snmp Screens Snmp Options 1Snmp Options 2 DSL Configuration Dhcp Relay Screens Servers 1±8 and Servers 9±16 B or C Dhcp Relay OptionsDomain Names Servers 1±8 BRTU Information DSL Configuration RTU ScreensRTU Information Monitoring the HotWire Dslam MCC Monitoring Menu TreeCard Info General Card Information Login HistoryMCC Monitoring Card Status Screens Syslog MCC Monitoring Physical Layer ScreensPhysical Layer Options 1 Active List Active Ports ListHdlc Bus Stats Hdlc Bus Statistics Physical Layer Options 2Ether Statistics Ethernet Statistics Active List Active Interfaces List MCC Monitoring Interfaces ScreensInterfaces Options Status Interface StatusSocket Statistics MCC Network Protocol ScreensNetwork Protocol Options 1 Network Protocol Options 2 UDP StatisticsNetwork Protocol Options 3 TCP Data Stats TCP StatisticsIP Statistics Network Protocol Options 4TCP Connection Statistics Snmp Statistics Network Protocol Options 5Icmp Statistics Icmp Packet Statistics Hdlc Stats Hdlc Statistics Snmp Authentication StatisticsNetwork Protocol Options 6 Routing Table Screen MCC IP Router ScreensRouting Table Routing Information Window ARP TableDSL Monitoring Menu Tree DSL Monitoring Card Status ScreensCard Status Options DSL Monitoring Physical Layer Screens Physical Layer Options 2 Physical Layer Options 3 DSL Perf Stats DSL Performance Stats Physical Layer Options 4DSL Link Perf DSL Link Performance Summary DSL Xmit Status DSL Transmit Stats DSL Error StatsPhysical Layer Options 5 DSL Monitoring Interfaces Screens DSL Network Protocol Screens Network Protocol Options 2 TCP Data Stats TCP Data Statistics Network Protocol Options 4 Network Protocol Options 5 Hdlc Statistics Hdlc Statistics LCP Stats PPP H B Network Protocol Options 7PPP Stats General H a Ipcp General Stats PPP H CDSL IP Router Screens 10. IP Router Options 110. IP Router Options 2 Routing Table Routing Information Window10. IP Router Options 3 11. RTU Information Diagnostics and Troubleshooting Applications ScreensTraceRoute Applications OptionsPing MCC and DSL Telnet MCC Card onlyDiagnostic Screens Selftest Diagnostics OptionsAlarms Card Alarms Packet Echo TestTroubleshooting Model # M R D U X XChecking Alarms Major Alarms 1 Failure Type ActionMajor Alarms 2 Failure Type Action Ethernet port 1. Check cable connections to the DslamThreshold Minor Alarms 1 Failure Type ActionMargin Link Down Error RateFailure Type Action Network Problems Slow Performance Excessive CollisionsNo Snmp Connection Established Filters Not WorkingNo Response at Start Up IP Routing ProblemsNo PPP Traffic Cannot Communicate with Interface System Does Not Recognize New DSL CardsLarge Number of Traps Cannot Communicate with 5446 RTU from MCC Card Cannot Upload Configurations to a Unix ServerUnexpected Subnet Data MCC User Accounts For Telnet Terminal Access to MCC Card Reboot Card MCC DSL User AccountsReboot Card DSL MCC Snmp Community Strings and Authentication Failure Trap Checklist for Setting Up Snmp FeaturesSetting Up Snmp Features Management System Source Validation for MCCEnable/Disable Endpoint Security to 5446 RTU DSL Snmp Community Strings and Authentication Failure TrapEnable DSL Port Traps Management System Source Validation for DSL cardsScenario One Fully Operational System Download Code and ApplyDownload Code Apply Download Scenario Two Download Only SystemNavigation Keys Traps Event Trap Class CommentTraps Traps MCC card sends the following traps Enterprise-Specific Traps RTU Related TrapsStandard Traps RTU Overview RTU SetupAccessing 5446 RTU MIBs IP Injection Tool Network Management SystemsMIB Browser Techniques IP Injection MIB OIDUsing the null entry RTU IP Configuration Table IP and Device MIBs SupportedAdditional pdn-common MIBs Supported ± MaskStatic Route Warning Messages Message MeaningGlossary Filter EthernetEthernet Address Gateway addressMultiplex MarginMCC Card PacketS1b RouterRouting Table S1cIndex NumbersIN-2 IN-3

Related manuals

Manual 132 pages 42.56 Kb

Manual 12 pages 4.86 Kb