Barco R9002240, R9002249 owner manual Vertical Linearity Adjustment, Vertical Size Adjustment

Random Access Adjustment Mode

Vertical Linearity Adjustment

The vertical linearity adjustment function corrects for vertical non- linearities which extend from the center of the image to the top and bottom of the image.

Push the control disk up or down to highlight V LINEARITY on the Geometry menu and then press ENTER.

ENTER will select vertical linearity adjustment,

EXIT returns to random access adjustment mode menu,

ADJUST returns to operational mode

Adjust the vertical linearity with the control disk until the distances between the horizontal lines of the set up pattern are equal from top to bottom.

EXIT will return to the Geometry menu

Vertical Size Adjustment

Push the control disk up or down to highlight V SIZE on the Geometry menu and then press ENTER.

ENTER will select vertical size adjustment

EXIT returns to random access adjustment mode menu,.

ADJUST returns to operational mode

Adjust the vertical size by pushing the control disk up or down until the correct image height is obtained.

Note :

-if the internal # pattern was selected, this pattern remains on the screen.

-if the genlocked pattern was selected, the external source will be displayed.

A bar scale and a numeric indicator give a visual indication of the vertical size adjustment.

Hint : In order to avoid loss of resolution in the projected image and to ensure maximum CRT longevity, do not use an excessively small vertical size setting.

EXIT will return to Geometry

Ideal

Image

Hight

GEOMETRY

H PHASE

RASTER SHIFT

LEFT-RIGHT (E-W)

LEFT SIDE CORRECTION

TOP-BOTTOM (N-S)

H SIZE

V LINEARITY

V SIZE

BLANKING

VLINEARITY 70

GEOMETRY

H PHASE

RASTER SHIFT

LEFT-RIGHT (E-W)

LEFT SIDE CORRECTION

TOP-BOTTOM (N-S)

H SIZE

V LINEARITY

V SIZE

BLANKING

then <ENTER>

<EXIT> to return.

VSIZE

70

	Ideal
Image too
		Image too
	Image
Tall	Hight	Short

6-14 5975688 BARCOVISION 1609S 131097