E
Error display
The following error window appears when an error is detected with the FlashPath.
The message in the error window differs according to the situation.
[When the battery power is low]
“The FlashPath in drive a: has a low battery. The inserted SmartMedia has been made read only.”
[When the SmartMedia is not inserted in FlashPath or it is inserted improperly]
“The SmartMedia cannot be accessed. Please eject the FlashPath in drive a: and be sure that the SmartMedia has been inserted properly.”
[When FlashPath is in shutdown mode for battery power saving]
“The FlashPath has powered off to save its batteries. Please eject the FlashPath from drive a: and
[When the internal format of the SmartMedia is incompatible with the equipment]
“The logical filing system on the SmartMedia is unrecognized. This SmartMedia cannot be used with FlashPath.”
78