Planar Dome EX manual About the Display

Page 11

About the Display

The Dome EX display systems, ranging from 2 to 5 megapixels, consists of a TFT LCD panel and a display board and driver. The display’s thin film transistors, in a transmissive-type display, use an integrated cold cathode fluorescent tube (CCFT) backlight system.

The display is designed for medical imaging in diagnostic settings, in portrait or landscape orientation, and comes fully tuned with gamma correction that complies with the DICOM Part 14 Standard. The all- digital design enables the display to produce the sharp, crisp images critical to softcopy medical viewing. Unwanted analog display image artifacts are eliminated.

Bundled with the display system, the Dome CXtra software enhances the functionality of the Dome EX display with a range of value-added services, such as DICOM calibration, error reporting, and backlight saver. Network management of Dome displays running the Dome CXtra software require the Enterprise Management Service for Dome CXtra. For more information, refer to Dome CXtra User’s Guide.

Image 11

Contents User’s Guide Dome EX DisplayPlanar Systems, Inc. All rights reserved Contents Product Information Intended use Symbol explanationsSafety tips Safety precautionsPreventing fire and injury Unpacking and handling tipsCleaning the display Disposal information Shipping/storing the displayDVI cable About the Display System Requirements Display Components Viewing angle Orientation modeDisplay Positions Tilt range Height rangeUSB hub Desk Stand FeaturesStand height lock Stand cable coverInstalling the Display Tips Set the DIP Switch on the Dome DX2 BoardTo install the display controller Install the Display ControllerTo connect the cables Connect the Video and Power CablesTo change the display properties Install the Dome DX Display DriverTo install the driver To enable the displayTo set driver options To set the resolution and paletteAuto-orientation To set brightnessTo configure the display Install the AX3 Display DriverTo use a dual-display configuration To adjust the display propertiesTo set the display mode manually Appendix Problem Possible Cause Solution TroubleshootingCategory Characteristic Item Specification Dome E2 SpecificationEnvironment Power SupplyReliability Model Dome E3 SpecificationDome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Details of DIN connectors Connector PortsLED Status Lights LED B status information after initial power-on Power-up sequence information from LEDLED a status information after initial power-on Single Desktop To set the display resolutionRestoring dual heads To change the configuration to single desktopSystem configuration requirement Auto-InstallationInstallation options Prompting user response during Fastinst.bat To remove the AX3 driver Display Driver RemovalTo remove the Dome DX driver Power Management Grayscale Palette Options Nonlinear static gray palette Palette options with multiple displaysDesktop icons Dynamic gray paletteStatic gray palette Index Using single desktop Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement Korea AustralianChina JapanSummary Standard WarrantyStandard Warranty Return Procedure Limitation of Implied Warranties Summary Limitations and Exclusions of Dome DisplaysEffect of Local Law Exclusion of DamagesMedicalsales@planar.com Medicalsupport@planar.com