Planar Dome EX manual Display Mtbf 30,000 hours Backlight

Page 33

Power Supply

CAUTION: Use only the power adapter supplied with the Dome E3c display unit; Ault MW122RA1223F52.

Category

Characteristic Item

Specification

 

 

 

Power input

Voltage selection

Auto-ranging

requirements

Voltage

100 – 240V AC

 

 

Current

2.0 A

 

Frequency

50 to 60 Hz

 

 

 

Power output

Voltage

12 V DC ±5%

requirements

Current

10.0 A (120 W)

 

 

 

 

Physical

Size

228.6 mm x 76.2 mm x 50.8 mm

 

 

(9 in x 3 in x 2 in)

 

Weight

1.3 kg (2.75 lb)

 

 

 

Reliability

Characteristic item

Specification

 

 

Display

MTBF 30,000 hours

 

 

Backlight

MTBF 30,000 hours to 25% brightness with backlight on continuously

 

 

Environment

Characteristic item

 

Specification

 

 

 

EMI shielding

 

No emission of low-level radiation

 

 

 

Temperature

operating

0° C to 50° C

 

storage

-10° to 60° C

 

 

 

Humidity

operating

8% to 80% Relative Humidity

 

 

(non-condensing)

 

storage

5% to 90% Relative Humidity

 

 

(non-condensing)

 

 

 

Dome E3c Specification 23

Image 33
Contents User’s Guide Dome EX DisplayPlanar Systems, Inc. All rights reserved Contents Product Information Intended use Symbol explanationsSafety tips Safety precautionsPreventing fire and injury Unpacking and handling tipsCleaning the display Disposal information Shipping/storing the displayDVI cable About the Display System Requirements Display Components Display Positions Orientation modeTilt range Height range Viewing angleStand height lock Desk Stand FeaturesStand cable cover USB hubInstalling the Display Tips Set the DIP Switch on the Dome DX2 BoardTo install the display controller Install the Display ControllerTo connect the cables Connect the Video and Power CablesTo install the driver Install the Dome DX Display DriverTo enable the display To change the display propertiesAuto-orientation To set the resolution and paletteTo set brightness To set driver optionsTo configure the display Install the AX3 Display DriverTo adjust the display properties To set the display mode manuallyTo use a dual-display configuration Appendix Problem Possible Cause Solution TroubleshootingCategory Characteristic Item Specification Dome E2 SpecificationPower Supply ReliabilityEnvironment Model Dome E3 SpecificationDome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Details of DIN connectors Connector PortsLED Status Lights Power-up sequence information from LED LED a status information after initial power-onLED B status information after initial power-on Single Desktop To set the display resolutionRestoring dual heads To change the configuration to single desktopSystem configuration requirement Auto-InstallationInstallation options Prompting user response during Fastinst.bat Display Driver Removal To remove the Dome DX driverTo remove the AX3 driver Power Management Grayscale Palette Options Desktop icons Palette options with multiple displaysDynamic gray palette Nonlinear static gray paletteStatic gray palette Index Using single desktop Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement China AustralianJapan KoreaStandard Warranty Standard Warranty Return ProcedureSummary Limitation of Implied Warranties Summary Limitations and Exclusions of Dome DisplaysEffect of Local Law Exclusion of DamagesMedicalsales@planar.com Medicalsupport@planar.com