Planar Dome EX manual LED Status Lights

Page 38

LED Status Lights

The two LEDs on the back panel provide information about the display.

LED A describes the digital-link status between the display controller and the interface.

LED B describes the display-panel status. it shows any faults currently in the panel.

Reset button (left) and LEDs on interface plate

LED A, top

LED B

28 Dome EX Display

Image 38
Contents Dome EX Display User’s GuidePlanar Systems, Inc. All rights reserved Contents Product Information Symbol explanations Intended useSafety precautions Safety tipsUnpacking and handling tips Preventing fire and injuryCleaning the display Shipping/storing the display Disposal informationDVI cable About the Display System Requirements Display Components Tilt range Height range Orientation modeDisplay Positions Viewing angleStand cable cover Desk Stand FeaturesStand height lock USB hubInstalling the Display Set the DIP Switch on the Dome DX2 Board TipsInstall the Display Controller To install the display controllerConnect the Video and Power Cables To connect the cablesTo enable the display Install the Dome DX Display DriverTo install the driver To change the display propertiesTo set brightness To set the resolution and paletteAuto-orientation To set driver optionsInstall the AX3 Display Driver To configure the displayTo use a dual-display configuration To adjust the display propertiesTo set the display mode manually Appendix Troubleshooting Problem Possible Cause SolutionDome E2 Specification Category Characteristic Item SpecificationEnvironment Power SupplyReliability Dome E3 Specification ModelDome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Connector Ports Details of DIN connectorsLED Status Lights LED B status information after initial power-on Power-up sequence information from LEDLED a status information after initial power-on To set the display resolution Single DesktopTo change the configuration to single desktop Restoring dual headsAuto-Installation System configuration requirementInstallation options Prompting user response during Fastinst.bat To remove the AX3 driver Display Driver RemovalTo remove the Dome DX driver Power Management Grayscale Palette Options Dynamic gray palette Palette options with multiple displaysDesktop icons Nonlinear static gray paletteStatic gray palette Index Using single desktop Regulatory Compliance Canada, European Union, United StatesPage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement Japan AustralianChina KoreaSummary Standard WarrantyStandard Warranty Return Procedure Summary Limitations and Exclusions of Dome Displays Limitation of Implied WarrantiesExclusion of Damages Effect of Local LawMedicalsales@planar.com Medicalsupport@planar.com