Planar Dome EX manual Desk Stand Features, Stand height lock, Stand cable cover, USB hub

Page 15

Desk Stand Features

Unfasten the stand lock to adjust display height. Remove the stand cover to thread the power cord and DVI cable connections to the display. To activate the USB hub function, the display must be connected to a USB-compliant computer or another hub with a USB cable. Even if the display is in power-saving mode, the USB devices function when connected to the USB ports of the display.

Stand height lock

Move the stand lock lever to the left to adjust the height of the display.

Stand cable cover

Press the PUSH button at the bottom of the desk stand and pull the stand cable cover down and out to remove it.

USB hub

Use the integrated, bus- powered USB hub to attach USB devices to the display rather than to the computer.

About the Display 5

Image 15

Contents User’s Guide Dome EX DisplayPlanar Systems, Inc. All rights reserved Contents Product Information Intended use Symbol explanationsSafety tips Safety precautionsPreventing fire and injury Unpacking and handling tipsCleaning the display Disposal information Shipping/storing the displayDVI cable About the Display System Requirements Display Components Viewing angle Orientation modeDisplay Positions Tilt range Height rangeUSB hub Desk Stand FeaturesStand height lock Stand cable coverInstalling the Display Tips Set the DIP Switch on the Dome DX2 BoardTo install the display controller Install the Display ControllerTo connect the cables Connect the Video and Power CablesTo change the display properties Install the Dome DX Display DriverTo install the driver To enable the displayTo set driver options To set the resolution and paletteAuto-orientation To set brightnessTo configure the display Install the AX3 Display DriverTo adjust the display properties To set the display mode manuallyTo use a dual-display configuration Appendix Problem Possible Cause Solution TroubleshootingCategory Characteristic Item Specification Dome E2 SpecificationPower Supply ReliabilityEnvironment Model Dome E3 SpecificationDome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Details of DIN connectors Connector PortsLED Status Lights Power-up sequence information from LED LED a status information after initial power-onLED B status information after initial power-on Single Desktop To set the display resolutionRestoring dual heads To change the configuration to single desktopSystem configuration requirement Auto-InstallationInstallation options Prompting user response during Fastinst.bat Display Driver Removal To remove the Dome DX driverTo remove the AX3 driver Power Management Grayscale Palette Options Nonlinear static gray palette Palette options with multiple displaysDesktop icons Dynamic gray paletteStatic gray palette Index Using single desktop Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement Korea AustralianChina JapanStandard Warranty Standard Warranty Return ProcedureSummary Limitation of Implied Warranties Summary Limitations and Exclusions of Dome DisplaysEffect of Local Law Exclusion of DamagesMedicalsales@planar.com Medicalsupport@planar.com