Planar Dome EX manual Install the AX3 Display Driver, To configure the display

Page 22

Install the AX3 Display Driver

Before you install the driver, remove any previously installed display driver for the display controller from your system.

To install the driver

1Start the system. Click Cancel on the Found New Hardware Wizard. Click No when the system prompts you restart the computer.

2Insert the driver installation CD and run SETUP.EXE.

3 Click Next.

4 Click Yes to the license agreement. The installation starts.

5Follow the onscreen instructions to complete the installation. Planar recommends that you select the Express installation option.

6When the Setup complete message appears, select Yes, I want to restart my computer now. and click Finish.

7If the Digital Signature Not Found message appears, click Yes or Continue to complete the driver installation.

To configure the display

1Right-click the desktop and select Properties > Settings.

2 Use the native resolution of the display.

3 Click OK until you return to the desktop.

12 Dome EX Display

Image 22

Contents Dome EX Display User’s GuidePlanar Systems, Inc. All rights reserved Contents Product Information Symbol explanations Intended useSafety precautions Safety tipsUnpacking and handling tips Preventing fire and injuryCleaning the display Shipping/storing the display Disposal informationDVI cable About the Display System Requirements Display Components Tilt range Height range Orientation modeDisplay Positions Viewing angleStand cable cover Desk Stand FeaturesStand height lock USB hubInstalling the Display Set the DIP Switch on the Dome DX2 Board TipsInstall the Display Controller To install the display controllerConnect the Video and Power Cables To connect the cablesTo enable the display Install the Dome DX Display DriverTo install the driver To change the display propertiesTo set brightness To set the resolution and paletteAuto-orientation To set driver optionsInstall the AX3 Display Driver To configure the displayTo set the display mode manually To adjust the display propertiesTo use a dual-display configuration Appendix Troubleshooting Problem Possible Cause SolutionDome E2 Specification Category Characteristic Item SpecificationReliability Power SupplyEnvironment Dome E3 Specification ModelDome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Connector Ports Details of DIN connectorsLED Status Lights LED a status information after initial power-on Power-up sequence information from LEDLED B status information after initial power-on To set the display resolution Single DesktopTo change the configuration to single desktop Restoring dual headsAuto-Installation System configuration requirementInstallation options Prompting user response during Fastinst.bat To remove the Dome DX driver Display Driver RemovalTo remove the AX3 driver Power Management Grayscale Palette Options Dynamic gray palette Palette options with multiple displaysDesktop icons Nonlinear static gray paletteStatic gray palette Index Using single desktop Regulatory Compliance Canada, European Union, United StatesPage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement Japan AustralianChina KoreaStandard Warranty Return Procedure Standard WarrantySummary Summary Limitations and Exclusions of Dome Displays Limitation of Implied WarrantiesExclusion of Damages Effect of Local LawMedicalsales@planar.com Medicalsupport@planar.com