Planar Dome EX manual Display Components

Page 13

Display Components

Review this illustration of the back panel to identify controls and ports on the display unit.

1 2

3

4

Legend

1Reset button. Restores the display configuration to its default setting.

2LED status lights. Provides information about the status of the display.

3DIN connector. Drives power to the display; 4-pin connector on the Dome E2 display, 8-pin connector on the Dome E3, Dome E3c, and Dome E5 displays.

4 DVI connector. Drives the data to the display.

About the Display 3

Image 13
Contents User’s Guide Dome EX DisplayPlanar Systems, Inc. All rights reserved Contents Product Information Intended use Symbol explanationsSafety tips Safety precautionsPreventing fire and injury Unpacking and handling tipsCleaning the display Disposal information Shipping/storing the displayDVI cable About the Display System Requirements Display Components Display Positions Orientation modeTilt range Height range Viewing angleStand height lock Desk Stand FeaturesStand cable cover USB hubInstalling the Display Tips Set the DIP Switch on the Dome DX2 BoardTo install the display controller Install the Display ControllerTo connect the cables Connect the Video and Power CablesTo install the driver Install the Dome DX Display DriverTo enable the display To change the display propertiesAuto-orientation To set the resolution and paletteTo set brightness To set driver optionsTo configure the display Install the AX3 Display DriverTo set the display mode manually To adjust the display propertiesTo use a dual-display configuration Appendix Problem Possible Cause Solution TroubleshootingCategory Characteristic Item Specification Dome E2 SpecificationReliability Power SupplyEnvironment Model Dome E3 SpecificationDome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Details of DIN connectors Connector PortsLED Status Lights LED a status information after initial power-on Power-up sequence information from LEDLED B status information after initial power-on Single Desktop To set the display resolutionRestoring dual heads To change the configuration to single desktopSystem configuration requirement Auto-InstallationInstallation options Prompting user response during Fastinst.bat To remove the Dome DX driver Display Driver RemovalTo remove the AX3 driver Power Management Grayscale Palette Options Desktop icons Palette options with multiple displaysDynamic gray palette Nonlinear static gray paletteStatic gray palette Index Using single desktop Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement China AustralianJapan KoreaStandard Warranty Return Procedure Standard WarrantySummary Limitation of Implied Warranties Summary Limitations and Exclusions of Dome DisplaysEffect of Local Law Exclusion of DamagesMedicalsales@planar.com Medicalsupport@planar.com