Planar Dome EX manual Symbol explanations, Intended use

Page 5

Symbol explanations

DISPOSAL. Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries require the use of separate recycling collection services.

CAUTION. Read the accompanying text carefully, for proper operation and maintenance of the display system.

DANGEROUS VOLTAGE. Important precautions about electric shock. Read the accompanying text carefully, to prevent damage to components of the display system and for your safety.

DIRECT CURRENT.

BAROMETRIC PRESSURE. Transport and storage 12,000 meters (39,400 feet), maximum in unpressurized container

RELATIVE HUMIDITY. Transport and storage 5% to 90% (non-condensing).

TEMPERATURE. Transport and storage -10° to 60° C.

Intended use

The Dome EX display is an AMLCD display designed for viewing medical X-ray images. This unit should not be used near patients and should be kept outside of 1.83 m perimeter and 2.29 m vertical.

This device must not be used in primary image diagnosis in mammography.

CAUTION: Federal law restricts this device to sale by or on the order of a medical practitioner.

Product Information v

Image 5

Contents User’s Guide Dome EX Display Planar Systems, Inc. All rights reserved Contents Product Information Intended use Symbol explanationsSafety tips Safety precautionsPreventing fire and injury Unpacking and handling tipsCleaning the display Disposal information Shipping/storing the displayDVI cable About the Display System Requirements Display Components Display Positions Orientation modeTilt range Height range Viewing angleStand height lock Desk Stand FeaturesStand cable cover USB hubInstalling the Display Tips Set the DIP Switch on the Dome DX2 BoardTo install the display controller Install the Display ControllerTo connect the cables Connect the Video and Power CablesTo install the driver Install the Dome DX Display DriverTo enable the display To change the display propertiesAuto-orientation To set the resolution and paletteTo set brightness To set driver optionsTo configure the display Install the AX3 Display DriverTo use a dual-display configuration To adjust the display propertiesTo set the display mode manually Appendix Problem Possible Cause Solution TroubleshootingCategory Characteristic Item Specification Dome E2 SpecificationEnvironment Power SupplyReliability Model Dome E3 SpecificationDome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Details of DIN connectors Connector PortsLED Status Lights LED B status information after initial power-on Power-up sequence information from LEDLED a status information after initial power-on Single Desktop To set the display resolutionRestoring dual heads To change the configuration to single desktopSystem configuration requirement Auto-InstallationInstallation options Prompting user response during Fastinst.bat To remove the AX3 driver Display Driver RemovalTo remove the Dome DX driver Power Management Grayscale Palette Options Desktop icons Palette options with multiple displaysDynamic gray palette Nonlinear static gray paletteStatic gray palette Index Using single desktop Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement China AustralianJapan KoreaSummary Standard WarrantyStandard Warranty Return Procedure Limitation of Implied Warranties Summary Limitations and Exclusions of Dome DisplaysEffect of Local Law Exclusion of DamagesMedicalsales@planar.com Medicalsupport@planar.com