Planar Dome EX manual Dome E3 Specification

Dome E3 Specification

Model 933-0548-xx

In locations where 240V outlets are used, connect the Dome E3 display to only a center- tapped, 240V, single-phase supply (only for Canada and the United States).

Category	Characteristic Item	Specification
Screen	Screen size diagonal	528 mm (20.8 in.)
	Resolution	1536 x 2048 pixels (portrait)
		2048 x 1536 pixels (landscape)
	Pixel pitch	0.207 mm, 123 ppi
	Pixel arrangement	Subpixel vertical stripe
	Active area (mm)	423.9 (H) x 318.0 (V)
	Color supported	256 shades of gray, programmable gamma from
		palette of up to 3061 shades
	Refresh rate	60 Hz
	Contrast ratio	700:1 (typical)
	Brightness	800 cd/m2 (typical)
	Pixel rise/fall time	35 ms
	Viewing angle	170° (± 85°) horizontal/vertical
Interface	Digital Video In	DVI Rev. 1.0 digital dual-channel connector
	Display control - brightness/contrast	DDC2B+
	Display identification	EDID read using DDC2B+
	USB hub	Universal Serial Bus (USB) Rev. 1.1:
		1 uplink B port; 2 downlink A ports
	Display status	Dual-stack tricolor LEDs on back panel
Input formats	Landscape orientation	2048 x 1536 (8- and 24-bit per pixel)
	Portrait orientation	1536 x 2048 (8- and 24-bit per pixel) with
		automatic hardware rotate
	VGA to SXGA	640 x 480 to 1280 x 1024 pixels displayed in
		both landscape and portrait rotations
	Screen type	AMLCD (active-matrix liquid crystal display)
Physical	Display size (without stand)	475 mm x 368 mm x 96 mm
		(18.7 in. x 14.5 in. x 4.0 in.)
	Display weight (without stand)	6.35 kg (<15 lb)
	Mounting options	Desktop stand with integrated USB (standard);
		100-mm VESA mounting (optional)
Power	Adapter	Ault MW122RA1223F52 (CAUTION: Use only the
		power adapter supplied with the display unit.)

Dome E3 Specification 19