InFocus XS1 manual Connecting an S-Video source device

Page 20

Connecting an S-Video source device

Examine your Video source device to determine if it has an unused S-Video output socket available:

•If so, you can continue with this procedure.

•If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to an S-Video source device:

1.Take an S-Video cable and connect one end to the S-Video output socket of the Video source device.

2.Connect the other end of the S-Video cable to the S-VIDEO socket on the projector.

3.If you wish to make use the projector (mixed mono) speaker, take a suitable audio cable and connect one end of the cable to the audio output sockets of the video device, and the other end to the AUDIO socket of the projector.

Once connected, the audio can be controlled by the projector On-Screen

Display (OSD) menus. See "Audio Settings" on page 48 for details. The final connection path should be like that shown in the following diagram:

A/V device

S-Video cable

Audio cable

• The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See "Connecting audio" on page 16 for details.

•If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

•If you have already made a Component Video connection between the projector and this S-Video source device using Component Video connections, you need not connect to this device using an S-Video connection as this makes an unnecessary second connection of poorer picture quality. See "Connecting Video source devices" on page 16 for details.

20 Connection

Image 20

Contents Reference Guide Table of contents Projector features IntroductionShipping contents Projector exterior view Front/upper side Rear/lower sideControls and functions ProjectorRemote control Digital Zoom buttons +Keystone buttons Up FreezeRemote control effective range Replacing the remote control batterySet Rear Ceiling in the System Setup Basic Positioning your projectorChoosing a location Front TableObtaining a preferred projected image size Page Screen diagonal Connection Connecting a computer or monitorConnecting a computer Iii Connecting a monitor Connecting Video source devices Connecting audioBest video quality Better video qualityConnecting a DVI source device Connection Connecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceConnecting a composite Video source device To connect the projector to a composite Video source deviceOperation Starting up the projectorUsing the menus Sub-menuUsing a security cable lock Utilizing the password functionSecuring the projector Removing the control keypad on the projectorHighlight Change Security Settings and press Mode/Enter Setting a passwordIf you forget the password Disabling the password function Entering the password recall procedureChanging the password Switching input signal DVI-A DVI-DCreating your own startup screen Changing Color SpaceAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image clarityCorrecting keystone Page Selecting the aspect ratio About the aspect ratioSelecting a picture mode Picture modes for different types of signalsPC/DVI-A/DVI-D Signal Input YPbPr/S-Video/Video/HDCP Signal InputUsing Wall Color Setting the User 1/User 2 modeFine-tuning the image quality in user modes Adjusting BrilliantColor Selecting a color temperatureAbout color temperatures 3D Color ManagementPress Mode/Enter and the 3D Color Management page displays Setting the presentation timer Go to the System Setup BasicPresentation Timer menu and press Mode Enter to display the Presentation TimerFreezing the image To cancel the timer, perform the following stepsLocking control keys Hiding the image Operating in a high altitude environmentAdjusting the sound Adjusting the sound levelPersonalizing the projector menu display Muting the soundShutting down the projector Menu operation Menu systemBasic AdvancedDisplay menu Source menuPicture menu System Setup Basic menu System Setup Advanced menu Status Information menuCurrent System Maintenance Care of the projectorSetting Lamp Mode as Economic Lamp informationGetting to know the lamp hour Extending lamp lifeTiming of replacing the lamp Status MessageReplacing the lamp Page Resetting the lamp timer Tighten the screw that secures the lampIndicators Troubleshooting Remote control does not workProjector does not turn on No pictureSpecifications Projector specificationsDimensions Timing chartHorizontal Vertical Pixel Resolution Frequency Mode KHz MHz Supported timing for PC including DVI-D inputSupported timing for Video and S-Video inputs Signal Format Horizontal Vertical Frequency Frequency kHzSupported timing for Component-YPbPrinput Disclaimer Copyright informationCopyright