Controls and functions
Projector
1
2 | 8 |
| |
3 |
|
4 | 9 |
5 | 10 |
6 | 11 |
7 | 12 |
| 13 |
| 9 |
1.Focus ring
Adjusts the focus of the projected image. See
2.TEMPerature warning light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 56 for details.
3.POWER indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 56 for details.
7.BLANK
Used to hide the screen image. See "Hiding the image" on page 40 for details.
8.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 56 for details.
9.Keystone/Arrow buttons ( / Up,
/ Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 30 for details.
10.AUTO
Automatically determines the best picture timings for the displayed image. See
11. Right/
Activates panel key lock. See "Panel Key Lock" on page 47 for details. When the
4. II Power
Toggles the projector on or off.
See "Starting up the projector" on page 22 and "Shutting down the projector" on page 42 for details.
5.Menu/Exit
Turns on the
6. Left
12.SOURCE
Displays the source selection bar. See "Switching input signal" on page 27 for details.
13.Mode/Enter
Selects an available picture setup mode. See "Selecting a picture mode" on page 33 for details.
Enacts the selected
Selects the desired menu items and makes adjustments.
6 Introduction