InFocus XS1 manual Menu operation, Menu system

Page 43

Menu operation

Menu system

Please note that the on-screen display (OSD) menus vary according to the signal type selected.

Main menu	Sub-menu	Options

	Wall Color	Off/Light Yellow/Pink/Light
	Wall Color	Green/Blue/Blackboard
		Green/Blue/Blackboard
1.	Aspect Ratio	4:3/16:9/Auto/Real
1.	Keystone
DISPLAY	Position
	Phase
	H. Size
	Digital Zoom
		PC source: Brightest/Presentation/Photo/Cinema/
	Preset Mode	User 1/User 2
	Preset Mode	Video source: Brightest/Standard/Cinema/User 1/
		Video source: Brightest/Standard/Cinema/User 1/
		User 2
	Reference Mode	PC source: Brightest/Presentation/Photo/Cinema
	Reference Mode	Video source: Brightest/Standard/Cinema

Brightness

Contrast

2.Color

	PICTURE	Tint
		Sharpness
		BrilliantColor™			On/Off
		Color Temperature			T1/T2/T3/T4
		3D Color		Primary Color	R/G/B/Y/C/M
		3D Color		Hue
		Management		Saturation
				Gain
		Save Settings
	3. SOURCE	Quick Auto Search			On/Off
	3. SOURCE	Color Space Conversion			RGB/YUV
		Color Space Conversion			RGB/YUV

					•	Source
	6.				•	Preset Mode
	6.		Current System Status		•	Resolution
	INFORMATION		Current System Status		•	Resolution
	INFORMATION				•	Color System
					•	Equivalent Lamp Hour

Operation 43

Image 43

Contents Reference Guide Table of contents Introduction Projector featuresShipping contents Front/upper side Rear/lower side Projector exterior viewProjector Controls and functionsFreeze Remote controlDigital Zoom buttons + Keystone buttons UpReplacing the remote control battery Remote control effective rangeFront Table Set Rear Ceiling in the System Setup BasicPositioning your projector Choosing a locationObtaining a preferred projected image size Page Screen diagonal Connecting a computer Connecting a computer or monitorConnection Iii Connecting a monitor Better video quality Connecting Video source devicesConnecting audio Best video qualityConnecting a DVI source device Connection To connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to an S-Video source device Connecting an S-Video source deviceTo connect the projector to a composite Video source device Connecting a composite Video source deviceStarting up the projector OperationSub-menu Using the menusRemoving the control keypad on the projector Using a security cable lockUtilizing the password function Securing the projectorIf you forget the password Setting a passwordHighlight Change Security Settings and press Mode/Enter Changing the password Entering the password recall procedureDisabling the password function DVI-A DVI-D Switching input signalChanging Color Space Creating your own startup screenFine-tuning the image clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Page About the aspect ratio Selecting the aspect ratioYPbPr/S-Video/Video/HDCP Signal Input Selecting a picture modePicture modes for different types of signals PC/DVI-A/DVI-D Signal InputSetting the User 1/User 2 mode Using Wall ColorFine-tuning the image quality in user modes 3D Color Management Adjusting BrilliantColorSelecting a color temperature About color temperaturesPress Mode/Enter and the 3D Color Management page displays Enter to display the Presentation Timer Setting the presentation timerGo to the System Setup Basic Presentation Timer menu and press ModeLocking control keys To cancel the timer, perform the following stepsFreezing the image Operating in a high altitude environment Hiding the imageMuting the sound Adjusting the soundAdjusting the sound level Personalizing the projector menu displayShutting down the projector Menu system Menu operationAdvanced BasicSource menu Display menuPicture menu System Setup Basic menu System Setup Advanced menu Current System Information menuStatus Care of the projector MaintenanceExtending lamp life Setting Lamp Mode as EconomicLamp information Getting to know the lamp hourStatus Message Timing of replacing the lampReplacing the lamp Page Tighten the screw that secures the lamp Resetting the lamp timerIndicators No picture TroubleshootingRemote control does not work Projector does not turn onProjector specifications SpecificationsSupported timing for PC including DVI-D input DimensionsTiming chart Horizontal Vertical Pixel Resolution Frequency Mode KHz MHzSupported timing for Component-YPbPrinput Signal Format Horizontal Vertical Frequency Frequency kHzSupported timing for Video and S-Video inputs Copyright Copyright informationDisclaimer