InFocus XS1 manual Remote control, Digital Zoom buttons +, Keystone buttons Up, Freeze

Remote control

5. Digital Zoom buttons (+, -)

1

2

3

4

5

	Magnifies or reduces the projected
6	image size. See "Magnifying and
7	searching for details on the projected

8picture" on page 31 for details.

6.Menu/Exit

9		Turns on the On-Screen Display
10		(OSD) menu. Exits and saves menu
		settings. See "Using the menus" on
11
		page 23 for details.
7	7.	Keystone buttons ( Up/ ,

Down/ )

Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 30 for details.

8.AUTO

1. II Power

Toggles the projector on or off. See "Starting up the projector" on page 22 and "Shutting down the projector" on page 42 for details.

2.FREEZE

Freezes the projected image. See "Freezing the image" on page 39 for details.

3. Left

When the On-Screen Display (OSD) menu is activated, the #3, #7 and #9 buttons are used as directional arrows to select the desired menu items and to make adjustments. See "Using the menus" on page 23 for details.

4.BLANK

Used to hide the screen image. See "Hiding the image" on page 40 for details.

Automatically determines the best picture timings for the displayed image. See "Auto-adjusting the image" on page 29 for details.

9. Right/

Activates panel key lock. See "Panel Key Lock" on page 47 for details.

10.SOURCE

Displays the source selection bar. See "Switching input signal" on page 27 for details.

11.Mode/Enter

Depending upon which input signal is selected, selects an available picture setup mode. See "Selecting a picture mode" on page 33 for details.

Enacts the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 23 for details.

Introduction 7