Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you will need to manually correct it following ONE of these steps.
• Press 
/ 
on the projector or remote control to display the Keystone correction
page. Press 
to correct keystoning at the
top of the image. Press 
to correct keystoning at the bottom of the image.
• Press Menu/Exit on the projector or remote control. Go to the DISPLAY > Keystone and
adjust the values by pressing 
or 
on the projector or remote control.
Keystone
Press | / . | Press | / . |
MENU Back
30 Operation