To adjust the settings:
1.Go to the PICTURE menu and highlight 3D Color Management.
2.Press Mode/Enter and the 3D Color Management page displays.
3.Highlight Primary Color and press 
/ 
to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta.
4.Press 
to highlight Hue and press 
/ 
to select its range. Increase in the range will include colors consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right for how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected | RED | Yellow | GREEN | |
| ||||
picture will be selected. Increasing its range |
|
|
| |
will include red close to yellow and red close |
|
|
| |
to magenta. | Magenta |
| Cyan | |
5. Press | to highlight Saturation and adjust |
| ||
|
|
| ||
its values to your preference by pressing
/ . Every adjustment made will reflect to | BLUE |
the image immediately. |
|
For example, if you select Red and set its |
|
value at 0, only the saturation of pure red |
|
will be affected. |
|
Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
6.Press 
to highlight Gain and adjust its values to your preference by pressing
/ 
. This will affect the contrast level of the primary color selected. Every adjustment made will be reflected to the image immediately.
7.Repeat steps 3 to 6 for other color adjustments.
8.Make sure you have carried out all of the desired adjustments.
9.Press Menu/Exit to exit and save the settings.
Operation 37