InFocus XS1 manual Picture menu

PICTURE menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION	DESCRIPTION
(default setting /
value)
Preset Mode	Pre-defined picture modes are provided so you can optimize
(PC/DVI-A/DVI-D:	your projector image set-up to suit your program type. See
	"Selecting a picture mode" on page 33 for details.
Brightest;
YPbPr/ S-Video/
Video: Standard)
Reference	Selects an picture mode that most suits your need for the image
	quality and further fine-tune the image based on the selections
Mode	listed on the same page below. See "Setting the User 1/User 2
	mode" on page 34 for details.
Brightness	Adjusts the brightness of the image. See "Adjusting Brightness"
	on page 35 for details.
Contrast	Adjusts the degree of difference between dark and light in the
	image. See "Adjusting Contrast" on page 35 for details.
Color	Adjusts the color saturation level -- the amount of each color in a
(0)	video image. See "Adjusting Color" on page 35 for details.
Tint	Adjusts the red and green color tones of the image. See
(0)	"Adjusting Tint" on page 35 for details.
Sharpness	Adjusts the image to make it look sharper or softer. See
(15)	"Adjusting Sharpness" on page 35 for details.
BrilliantColor™	See "Adjusting BrilliantColor™" on page 36 for details.
(On)	When BrilliantColor™ is set to Off, the color temperature
	adjustment will not function.
Color	There are four color temperature settings are available. See
Temperature	"Selecting a color temperature" on page 36 for details.
(T3)
3D Color	See "3D Color Management" on page 36 for details.
Management
Save Settings	Saves the settings made for User 1 or User 2 mode.

46 Operation