Runco VX-4C, VX-6C manual Folded Optics, Source Connections, Rear Connector Panel

INSTALLATION AND SETUP

2.8Folded Optics

In rear screen applications where space behind the pro- jector is limited, a mirror may be used to fold the opti- cal path. The position of the projector and mirror must be accurately set-if considering this type of installation, call your Runco dealer for assistance.

2.9Source Connections

The rear panel of the projector provides standard input panels to which you may connect a vari- ety of sources. See below - the lower left area (INPUT 1) typically accepts an RGB signal from an external RGB source (such as the VHD Ultra Controller), or it can also be used for YPbPr sig- nals from DTV sources. The upper right panel-the Video Decoder Module-accepts only compos- ite video at INPUT 3 or S-videoat INPUT 4 from devices such as VCRs, laser disc players or DVD players. There are also several optional interfaces available for connecting other sources at INPUT 2. Such an option installs in the upper left area, just below the audio connectors. For any input, including the optional inputs, audio with loop through connects at the audio input panel located between the license label area and INPUT 2.

Note: The decoder module is an option; it is not supplied with the Projector.

Vivix Controller	Connect Control Line
	From Vivix Controller

Rear Connector Panel

2-12