What Memory Banks Are Defined So Far?

All Banks Appear in the

Memory Banks Menu

OPERATION

USING A MEMORY BANK: You can normally select a Memory Bank at any time by pressing Chan (see right). If you want to prevent a Memory Bank from appearing in this list, you must edit the Memory Bank as described in Memory Banks later in this section. Such a Memory Bank can still be selected by entering its number as shown at right.

current bank #

Bank : 02

bank#	bank name or
	frequency

NOTE: 1) The current Memory Bank is highlighted upon entering the Bank List, or, if this Memory Bank is not displayed in the list, the first Memory Bank in the list is highlighted.

2)Memory Banks created automatically do not appear in the Bank List unless a parameter has been changed.

All available Memory Banks are listed in the Memory Banks menu, which describes how each Memory Bank can be accessed and that serves as the gateway for editing, copying and deleting Memory Banks.

Press Menu to display the Runco Digital Home Cinema menu. To display the Memory Banks menu, press 3 , or move the highlight to the Memory Banks option and press Enter The Memory Banks menu will appear (see sample at right), with the active Memory Bank highlighted.

Memory Banks

01	1,5	h70.72k -	17.00	-
02	0,1	h70.75k -	17.00	-
03	0,1	h63.90k + 59.94		+

This menu lists all Memory Banks defined so far and indicates how they are connected to the pro- jector. The far left column contains current

Memory Bank numbers defined. The values in the far right columns indicate horizontal and ver- tical frequencies-if a name has been defined for this Memory Bank, it appears here instead. Other columns contain details pertaining to each Memory Bank setup, such as its switcher number, slot location and a variety of icons indicating access to the Memory Bank. See Editing a Memory Banks for details.

If you have more than a handful of Memory Banks, use Memory Banks not visible in this initial display.

and to see the remaining

To copy, delete or edit any of the Memory Banks listed in the Memory Banks menu, highlight the desired Memory Bank and do one of two things:

Press Func if you want to copy the selected Memory Bank or delete this or other Memory Banks. See Copying or Deleting a Memory Bank, on the following page.

Press Enter if you want to edit Memory Banks setups (i.e., non-image related parameters) for the selected Memory Bank. See Editing a Memory Bank, on the following page.

3-15