Runco VX-6C, VX-4C manual System Errors, Status LED Codes

OPERATION

System Errors

A system error message indicates that a serious malfunction has been detected and must be reported to the manufacturer (see Status LED Codes, below). The projector will no longer oper- ate and must be reset-power the projector down and up again with the Power key.

The Status LED Codes

If the "Status" LED on the back of the projector repeatedly flashes a pattern of yellow and red light while the "Power" LED glows a continuous red, you have encountered a likely system error requiring the attention of a qualified service technician (see System Warnings and System Errors, above). Try resetting the projector by powering it off and on again, cooling when necessary. Consult Table 1 and contact your Runco Dealer if the problem persists.

The specific pattern of flashing indicates the 2-digit code identifying the type of problem encoun- tered-the number of yellow flashes represents the first digit and the number of red flashes indi- cates the second digit. For example, a pattern of "yellow-yellow-red-red-red" is "Code 23", mean- ing the lamp ballast (power supply) is overheated. These codes include (see next page):

3-40