Runco VX-6C, VX-4C manual Safety Tips

Page 80

WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instal- lation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user will be required to correct the interference at his own expense.

DOC compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

DOC avis de conformation

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le Matériel D’interférence du Canada.

Safety Tips

Please read and follow the safety precautions listed below to ensure the equipment is free from damage, and to ensure that no injury will occur as a result of improper use.

•Do not insert any object, especially metal or liquids, into the VHD Ultra Controller.

•Do not place any objects containing water or any other liquid on top of the VHD Ultra Controller.

•Do not place the unit in direct sunlight, near heaters or in extremely dusty or humid locations

•Do not install this unit outdoors or otherwise exposed to the elements

•Do not place heavy objects on top of the unit

•If the power cord is damaged or frayed in any way, electrical shock and/or fire may result. Please do not place objects on the power cord, and keep the cord away from heat-emitting devices. Should the power cord become damaged in any way, please contact your Runco dealer for a replacement cord.

•Do not remove the cover of the unit for any reason. If any problems arise with the unit, please contact a Runco dealer or Runco International for service. Removing the cover will void the warranty.

6-3

Image 80

Contents VX-4c and VX-6c Page Table of Contents Page Introduction How The Projector Works?Introduction Components Purchase Record and ServicingQuick Setup Connect the Line Cord to AC PowerPosition the Projector Connect a SourceInstalling The Lens Install the lens capUnplug the projector Loosen 3 screwsRotate Slightly Align zoom gear ring to access 3 screwsRotate the lens barrel slightly Pull lens assembly out Remove Lens AssemblyInstall new lens assembly OrientationMotorized Lens Adjustments Adjust ImageAdjust Image Motorized Models Additional Considerations Installation ConsiderationsLifting Throw Distances Placement Section 720p960p 1024pCalculating Throw Distance Vertical & Horizontal Position Maximum Vertical Offsets Fixed LensesMaximum Vertical Offsets Zoom Lenses Maximum Horizontal Offset ALL Lenses MountingSpecial Mounting Horizontal and Vertical Tilt RangesSource Connections Rear Connector PanelFolded Optics RGB Signals Connecting RGB InputKeypad Protocols and Conversion Independent Keypads and ProjectorsRemote Keypad Protocol IR or Wired Keypad StepOpening the Keypad Set the JumpersLocating and Setting the Jumpers Shortcut Method Converting a KeypadISF 3C Calibration Andy SiedschlagInformation Overview Projector BasicsOperation Reading the Status LEDsWired Remote Optional Keypad CommandsPower ON/OFF IR RemoteInput Memory BankExit Arrow KeysVolume ColorTint DetailPosition Shutter OptionalMute Function KeyTest OSD On-screen displayHelp Navigating the Menus Runco Digital HomeCinema Menu On-line HelpTime-outs Accessing General Help TopicsUsing Slidebars and Other Controls To save or To cancel. When you are done, press Entering Text Example of Pull-Down ListEditing Text Selecting an Input Using Inputs and Memory BanksEditing Numerical Values Creating a New Memory Bank Automatic What Memory Banks Are Defined So Far? Copying or Deleting Memory Banks Copying a Memory BankDeleting a Memory Bank Editing a Memory BanksOperation Adjusting the Image Load DefaultScaling Parameters Scaling Parameters MenuFine V Dots Short CUT Press Image Adjustments Image Adjustments MenuShift Short CUT Press Blanking Top, Bottom, Left or RightSignal Type Contrast Short CUT PressBrightness Short CUT Press SharpnessGamma Curve Color BalanceSet Color Balance Gamma Curve Selected Gamma CurvesOSD Settings Menu Show Adjust Bar IR and Serial Setup MenuDisplay M. Bank List Show MessageWired Keypad Front IR Receiver / Back IR ReceiverTest Patterns Test Pattern MenuSubmenu for Menu Options Video TerminationMenu Options Installation Menu DMD Enable Test PatternsDMD Odd Pixel Menu Advanced Color TemperatureDMD Odd Pixel Operational Parameters Menu Color Balance Setup Color Balance Setup MenuPresets and FactoryPresets Set Color BalanceLamp Adjust Lamp Adjust submenuOperation Lamp Adjust Recording the New Lamp Serial NumberInvalid User Entry Error ConditionsInput Signal Error No Signal Other Signal Error MessagesSystem Warnings / Errors Bad SyncSystem Errors Status LED CodesSystem Error Codes Maintenance Projector LocationLamp and Filter Replacement Use only lamps supplied by RuncoCleaning VentilationServicing LensCase Replacing Keypad BatteriesReplacing Keypad Batteries How Old is The Lamp?Troubleshooting Cause / RemedySymptom The display is faint Symptom The power is on but the lamp is notSymptom The display is jittery or unstable Symptom The display is not sharp or clean… Symptom The display is reversed and/or upside-down…Symptom The display appears compressed or stretched… Symptom The display is noisy… Symptom Colors in the display are inaccurate…Symptom The display is not rectangular… Specifications Specifications VHD Ultra Controller Manual Remarque Safety Tips Introduction Front and Rear Panel Descriptions Rear Panel Power Input Remote Control Description Quick SET-UP Guide Menu Description and Navigation White Yellow Cyan Green Magenta Red Blue Page Installation Menu Screen Type Blanking BlankingAspect Ratios Active image area Actual screen area Blanked cut off Areas Dimensions RS-232 Communications RS-232 Commands Parameter min/max Value stored?Command VHD Ultra Specifications Active Line Time Ambient Light RejectionAnalog Video Aspect RatioColor Temperature Display SettingCheckbox Color ShiftInput Signal Help ScreenHorizontal Frequency Horizontal OffsetPixel Phase Resolution lensResolution projector MenuSource Setup RGB VideoRS-232 RS-422Throw Distance Variable ScanVertical Offset Video DecoderKeypad Reference Menu Tree Appendix C Page RUMA-010450