OPERATION
OSD* |
OSD (On-screen display)
Press and hold |
|
| for approximately 1 second to toggle menus on or off (i.e., visible or invis- | |||||
OSD* | ||||||||
ible). Or press |
|
|
| followed immediately by |
| or |
| to guarantee the correct toggle direc- |
| OSD* | ON | OFF | |||||
tion (useful if you are unsure of the present status). Note that invisible menus are fully function- al.
NOTES: 1) With OSD on, you can still mute menus, error messages, slidebars, etc. with the appropriate setting in the OSD Settings menu. 2) The status of the OSD* 
key is displayed in the LCD window on the rear panel of the projector.
Help |
Help |
|
|
|
|
| |
Press |
|
| for detailed information about any current menu and highlight. Press |
| again to | |
Help |
| Help | ||||
exit. Press |
|
| to access the General Help menu consisting of Using Help, Setup, | Keys, | Source | |
| Help | |||||
(Input) Selection and Stat/Pwr LEDs. Press Exit 
to leave General Help.
Test |
Test
Press Test 
to display one of the available test patterns. Press Test 
again to display the next avail- able pattern in the sequence. Test 
will exit after the last pattern, or press Exit 
at any time to remove the current test pattern from the screen and return to the current external source.
NOTE: For a complete list of all test patterns, see the Advanced menu description later in Section 3.
Keypad operating settings (protocols)
The remote keypad and the optional wired keypad both store keypad operating settings (called protocols) in memory. In some advanced applications, such as when you want to use two sepa- rate keypads to control two projectors independently, you may want to override the original pro- tocol set at manufacture (which is "A or B") for one of the keypads. See section 2.12, Keypad Protocols and Conversion for complete instructions.