Runco VX-6C, VX-4C Shift Short CUT Press, Blanking Top, Bottom, Left or Right, Image Adjustments

OPERATION

H-Shift

(SHORT CUT: Press

Position and adjust the top slidebar.)

This option moves picture right and left.

NOTE: The value shown represents where the approximate center of the image lies in relation to the total number of pixels available horizontally. This varies widely according to the signal-watch the image while adjusting.

V-Shift

(SHORT CUT: Press

Position and adjust the bottom slidebar)

This option moves the picture up and down.

NOTE: The value shown represents where the approximate center of the image lies in relation to the total number of pixels available vertically. This varies widely according to the signal-watch the image while adjusting.

Blanking: Top, Bottom, Left or Right

This submenu blanks (turns to black) the top, bottom, left, or right edge of the image so that any unwanted information is cropped from view. For example, when displaying native size video you may want to blank out a few of the top lines.

Scaling Parameters (2)

Top Blanking	0
Bottom Blanking	0
Left Blanking	0
Right Blanking	0

Image Adjustments

Use any of the following slidebars, pull-down lists or the checkbox to alter your image. Refer to "Using Slidebars and Other Controls" (earlier in this section) if you need help in selecting options and adjustments. Changes made to the Image Adjustments menu are applied immediately and are saved when you exit the menu (press Exit or Menu ).

Image Adjustments

Contrast 50

Brightness 50

Sharpness 2

Signal Type RGB

Color Balance

Signal Settings

Input Adjust

Image Adjustments Menu

3-20