Sharp AL-1633, AL-1644 operation manual Normal Copying, Copying from the document glass

2

Chapter 2

COPY FUNCTIONS

This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure adjustment.

NORMAL COPYING

This section explains how to make a regular copy.

If "Auditing mode" has been enabled (p.43), enter your 3-digit account number.

Copying from the document glass

1 Open the document cover/SPF, and place the original.

Place the original face down on the document glass. Align it with the original size scale.

Note An original up to A3 can be placed on the document glass.

2 Close the document cover/SPF.

3 Press the [ORIGINAL SIZE ENTER] key (ENTER ) and select the original size.

		When the original size is
		selected, the tray with the
	A3	same size of paper is
ENTER	A4	automatically selected.
	A4
	A5	(Two-tray model only)
	B4

XTRA

●Make sure that the PAPER SIZE indicator lights up. If the indicator is not lit, no tray has the same size of paper as the original. Load paper of the required size in a tray, or select the bypass tray with the [TRAY SELECT] key ( ) and copy from the bypass tray.

●The bypass tray must be manually selected.

●To copy on paper of a different size than the original, select the paper with the [TRAY SELECT] key ().

●If the ORIGINAL SIZE indicator is blinking, rotate the original so that it is the same orientation as blinking ORIGINAL SIZE indicator.

4 Set the number of copies.

5 Press the [START] key () to begin copying.

The copy is delivered to the paper output tray.

•	The paper output tray can hold up to 250
Note	sheets of paper.

•About one minute after copying ends, "Auto clear" activates and restores the copy settings to the initial settings. (p.15) The setting for "Auto clear time" can be changed in the user programs. (p.38)

•Press the [CLEAR] key ( ) to stop copying in the middle of a run.

21