Sharp AL-1644, AL-1633 operation manual Trademark acknowledgements

Page 6

The machine should be installed near an accessible power outlet for easy connection and disconnection.

Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded.

Note Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker.

Be sure to allow the required space around the machine for servicing and proper ventilation.

	20 cm (8")
20 cm	20 cm
(8")	(8")

CAUTIONS ON HANDLING

Be careful in handling the machine as follows to maintain the performance of this machine.

Do not drop the machine, subject it to shock or strike it against any object. Do not expose the drum cartridge to direct sunlight.

• Doing so will damage the surface (green portion) of the drum cartridge, causing smudges on copies.

Store spare supplies such as drum cartridges and TD cartridges in a dark place without removing from the package before use.

•If they are exposed to direct sunlight or excessive heat, poor copies may result.

Do not touch the surface (green portion) of the drum cartridge.

•Doing so will damage the surface of the cartridge, causing smudges on copies.

CAUTIONS ON LASER

Wave length	785 nm + 10 nm/- 15 nm

Pulse times	(8.141 µs ± 0.1 µs)/7 mm

Output power	0.14 mW – 0.22 mW

Trademark acknowledgements

•Microsoft® Windows® operating system is a trademark or copyright of Microsoft Corporation in the U.S.A. and other countries.

•Windows® 95, Windows® 98, Windows® Me, Windows NT® 4.0, Windows® 2000, and Windows® XP are trademarks or copyrights of Microsoft Corporation in the U.S.A. and other countries.

•IBM and PC/AT are trademarks of International Business Machines Corporation.

•Acrobat® Reader Copyright© 1987- 2002 Adobe Systems Incorporated. All rights reserved. Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.

•All other trademarks and copyrights are the property of their respective owners.

4

Image 6

Contents AL-1633 AL-1644Page Contents Troubleshooting Misfeed in the SPF only on the SPF modelChanges, e.g., near an Important Points When Selecting AN Installation SiteDo not install your machine in areas that are Air conditioner orTrademark acknowledgements Software Setup Guide separate manual Using the ManualOnline Manual on the accessory CD-ROM Environmental InformationThis manual covers the following models Conventions Used in this ManualSPF Differences Between Models Model AL-1644 AL-1633 AppearanceMain Features Part Names and Functions Parallel port Fusing unit release leversFusing unit paper guide Open to remove misfed paper Document feeder trayOperation Panel SPF indicator only on the SPF model Original Size Enter key Enter / Original Size indicatorsPaper Size indicators Auto Image key Auto % / indicatorChecking Packed Components and Accessories UnpackingSET-UP Install the TD cartridgeFor installation of the TD cartridge, see the next Gently lift and pull out the paper tray until it stopsInstalling the TD Cartridge TD cartridge replacement required indicator will go outClose the front cover Power OFF Power on and OFFPower on Power Save ModesPaper Paper tray type Paper type Size Weight CapacityLoading Paper Special papersLocks in place Loading PaperLoading the paper tray Fan the paperUnfold the bypass tray Important points when inserting paper in the bypass trayLoading the bypass tray Set the paper guides to the copy paper widthChanging a TRAY’S Paper Size Setting EnvelopesImportant points when using the printer mode Press the Start key and then press the Paper Size Enter keyNormal Copying Copying from the document glassOpen the document cover/SPF, and place the original Copying from the SPF only on the SPF model Set the originals face up in the document feeder traySet the number of copies Auto paper select mode Two-tray model only Selecting the Tray Auto tray switching Two-tray model onlyMaking a Copy Darker or Lighter Original typesAutomatic Ratio Selection Setting the Number of CopiesREDUCTION/ENLAREGMENT/ZOOM Original position Selectable ratiosManual Ratio Selection Selecting a preset ratioFine adjustment of the ratio Press the Auto Image key Auto %XY Zoom copying Press the Copy ratio display keyDown the Copy ratio display key TWO-SIDED Copying Using the Bypass Tray Copy original aPlace original B as shown below Dual page Copying Interrupting a Copy RUN Press the Interrupt key to interrupt the copy runReplace the previous originals and press the Start key Make sure that paper is loaded in the tray Using the Printer ModeBasic Procedure for Printing Click the Print button or the OK button to begin printingPausing a print job Using the Scanner ModeScanning Using the Keys on the Machine When Use close paper size is disabledPress a Scan Menu key to begin Scanning from Your ComputerScan Menu keys and the Button Manager scan menu ScanningPrinter During printing Operation in COPY, PRINTER, and Scanner ModesDuring copying Scanner During scan previewAdjusting the Automatic Exposure Level Photo indicator stops blinking and lights steadily Enabling Toner Save ModeWhen enabling toner Save mode, make sureCustomising Settings User ProgramsMinimum Explanation300dpi Short beepSelecting a Setting for a User Program Base settingsAuditing Mode Settings Settings for Auditing ModeAuditing Mode Factory default settingsSelecting Auditing Mode Settings For the setting codes, see Auditing Mode SETTINGS. p.41Account number change Auditing modeAccount number entry Account number deletionResetting account Copying when Auditing mode is enabledTroubleshooting MACHINE/COPYING Problems Pieces of paper inside machine Problem Cause and solution Misfeed occursPaper is not loaded properly Paper misfeed Too much paper is loaded in the trayPower Save indicator is only lit Lit Any other indicators are litPower Save indicator is Original smudged or blotchyPrinting and Scanning Problems Uneven Printed image is dirtyRuns off the paper Original is smudged or blotchy You have not specified a suitable resolutionBrightness and contrast settings are not suitable Poor scanning qualityClick Add or Remove Programs Removing the softwareClick the start button, and then click Control Panel If you need to remove the software, follow these stepsIndicators and Display Messages Misfeed Removal Remove the misfed originalAL-1644 AL-1633 Misfeed indicator will go out Misfeed in the Bypass TrayMisfeed in the Machine Misfeed in the paper feed areaMisfeed in the fusing area Allow easier removalMisfed paper during Misfeed in the transport area Close the side coverBe careful not to tear the misfed paper during removal Misfeed in the Upper Paper Tray Close the upper paper trayPush the upper paper tray in completely Close the lower side cover Open the lower side coverClose the lower paper tray Remove the misfed paper Grasp the handle to open the lower side coverReplacing the TD Cartridge Replacing the Drum Cartridge Drum cartridge replacement required Indicator will go out Total output count Checking the Total Output CountChecking the Total Output Count Total copy countPress the Light key to return to the normal display Checking the Toner Level and Drum Cartridge LifeToner Level Hold down the Clear key for more than 5 secondsRoutine Maintenance Cleaning the Document Glass and SPF/ Document CoverCleaning the Bypass Tray Paper Feed Roller Cleaning the Transfer Charger Proper Storage Storage of SuppliesSupply Part Numbers Supply listAccessories p.12 When moving this machine, follow the procedure belowMoving Instructions Specifications SPF only on the SPF model Specifications Printer FunctionScanner Function Software License Page Symbols IndexPrinting and scanning problems TD cartridge replacement requiredTray Select key 11, 19, 21, 23 Troubleshooting Normal copyingMachine settings Problem occursIndicators, lit and blinking Memo Memo Class Laser Product Laser Klasse Page 2004E