Canopy T1/E1 Multiplexer | September 2004 | ||
|
|
| T1/E1 Multiplexer FPGA Version 3.4 |
|
|
|
|
| LED |
| LED indicator descriptions |
|
|
| |
| LAN ACT | OFF when no activity; BLINKING when frames are being transmitted or | |
|
| received on the line |
|
|
|
| |
| T1/E1 Sync | ON when the port is synchronized (no alarm); OFF when Loss of signal | |
|
| (LOS); one LED for each T1/E1 |
1.2.6Features
The Canopy T1/E1 Multiplexer
◦installs easily.
◦multiplexes up to 4 T1 or 3 E1 circuits onto a Canopy Backhaul
◦enables T1/E1 extension over Ethernet networks.
◦supports
−synchronous
−CAS signaling transparent to all other signaling protocols on T1/E1.
−
−management interfaces.
−simplified troubleshooting through T1/E1 line loopback test.
1.2.7Specifications
Physical Specifications
Table 4 lists the physical specifications for the Canopy T1/E1 Multiplexer.
Table 4: Canopy T1/E1 Multiplexer physical specifications
Specification | Description |
|
|
DC Power | Option 1: 100/240 v, 47−63 Hz, 0.4 A (+3.3 v DC) |
|
|
| Option 2: −48 v DC |
|
|
LAN Connection | |
|
|
T1/E1 Connections | 4 |
|
|
Control Port | |
|
|
Indicators | power, ready, Canopy BH Ethernet link; Canopy BH Ethernet |
| activity; LAN Ethernet link; LAN Ethernet activity; T1/E1 |
| synchronization (one per port) |
Temperature | 0° C to 40° C |
|
|
Humidity | 95% |
|
|
Dimensions | 1.52” (3.86 cm) high x 5.57" (14.15 cm) wide and 7.50" (19.05 cm) |
| deep |
|
|
Weight | 1.5 pounds (680 grams) |
|
|
Issue 3 | Page 15 of 73 |