Motorola manual Managing Your Canopy T1/E1 Multiplexers

		2.1.1	Compliance	27
		2.1.2	Lightning Protection	27
		2.1.3	Electrocution Hazard	27
		2.1.4	Power Supply Unit	27
	2.2	Installation Procedures		28
		2.2.1	Package Contents	28
		2.2.2 Preparing for Installation and Setup		28
		2.2.3 Mounting the Canopy T1/E1 Multiplexer		28
		2.2.4 Connecting the Canopy T1/E1 Multiplexer		29
		2.2.5 Connecting Power to the Canopy T1/E1 Multiplexer		30
	2.3	Initial Configuration Procedures		32
		2.3.1 Installing Software from the CD-ROM		32
		2.3.2 Using EMS Software to Configure the Unit		33
		2.3.3 Accessing the CLI using a PC + HyperTerminal		34
		2.3.4 Configuring the Canopy T1/E1 Multiplexer using the CLI		34
		2.3.5 Creating a Login Account		35
	2.4	Configuration Procedures Using the CLI		36
		2.4.1 Logging into the System		36
		2.4.2 Changing the Administrator Password		36
		2.4.3 Select Line Type T1 or E1		37
		2.4.4	Select Line Coding	38
		2.4.5	Configure Ports	39
		2.4.6	Configure Timing	44
	2.5	Configuration Procedures Using the EMS		45
		2.5.1 Logging into the System		45
		2.5.2 Changing the Administrator Password		48
		2.5.3 Select Line Type T1 or E1		49
		2.5.4	Select Line Coding	49
		2.5.5	Configure Ports	50
		2.5.6	Configure Timing	52
3	Managing Your Canopy T1/E1 Multiplexers			53
	3.1	Remote Management through Control Port		53
	3.2	T1/E1 Alarms		54
	3.3	System Reset		56
	3.4	T1/E1 Loopback		57
		3.4.1	Invoking a T1/E1 Loopback using the CLI	58