AMX NXA-WAP250G manual Setup Wizard Network Setting

Initial Configuration

Step 2: Network Setting

The options on this page allow you to set the NXA-WAP250G’s IP address assignment method and configures the local Dynamic Host Configuration Protocol (DHCP) server and Network Address Translation (NAT) settings (FIG. 7).

FIG. 7 Setup Wizard - Network Setting

There are three basic methods for configuring the NXA-WAP250G’s IP address:

Dynamic IP — The IP address is assigned automatically from a home gateway router or other device that has a DHCP server feature (FIG. 8).

FIG. 8 Setup Wizard - Network Setting (Dynamic IP settings)

PPPoE — The IP address is assigned automatically from an Internet service provider (ISP) through an ADSL modem using Point-to-Point Protocol over Ethernet (PPPoE). If your ISP has provided you with a user name and password, enter these in the corresponding text boxes under PPPoE Setting (FIG. 9).

14 NXA-WAP250G 802.11b/g Wireless Access Point