System Configuration
The items on this page include:
SNTP Server Setting — Configures the WAP250G to operate as an SNTP client. When enabled, the time server IP address must be specified.
Primary Server: The IP address of an SNTP or NTP time server that the WAP250G attempts to poll for a time update.
Time Zone — Sets the number of hours your local time zone is located before or after UTC/ GMT. (Default: GMT+00)
Daylight Saving — The WAP250G provides a way to automatically adjust the system clock for Daylight Savings Time changes. To use this feature you must define the month and date to begin and to end the change from standard time. During this period the system clock is set back by one hour.
Updating Firmware
You can upgrade new WAP250G software from a local file on the management workstation, or from an FTP or TFTP server. Use the options on the Firmware Upgrade page to update the access point system software (FIG. 39).
FIG. 39 Firmware Upgrade - main page
After upgrading to new software, you must reboot the WAP250G to implement the new code. Until a reboot occurs, the WAP250G will continue to run the software it was using before the upgrade started.
Upgrade via the Web Page
The Local File page allows you to update the system software using HTTP to transfer a local file (FIG. 40).
The items on this page include:
New Firmware File — Specifies the name of the code file on the local web management station. You can use the Browse button to locate the image file locally on the management station.
Start Upgrade — Starts the download process. Be sure to allow enough time for the download to complete before rebooting the WAP250G.
39 | |
|
|