System Configuration
System Setting - VAP Management
The VAP Management page allows you to enable VAP management (FIG. 25).
FIG. 25 System Settings - VAP Management
When VAP management is enabled, it tags traffic from VAP#1 as high priority and traffic from VAP#2 as low priority.
This setting is only available when the Operation Mode is set to AP.
System Settings - Reset System
The Reset System page (FIG. 26) allows you to restart the WAP250G software and restore factory default settings.
FIG. 26 System Settings - Reset System
The items on this page include:
Restore Factory Settings: Click the Restore button to reset the configuration settings for the WAP250G to the factory defaults and reboot the system. Note that all user configured information will be lost. You will have to use the default IP address to
Reboot Access Point: Click the Reboot button to reboot the system.
28 |