AMX NXA-WAP250G manual System Configuration

System Configuration

System Configuration

The NXA-WAP250G’s basic settings can be configured using the Setup Wizard, as described in the previous chapter, “Initial Configuration.” However, for some installations, you may need to configure specific settings that are not available in the Setup Wizard. The Advanced Setup menu provides access to all the unit’s settings for complete control of the WAP250G’s features.

To access the Advanced Setup menus, follow these steps:

1.Login to the web interface (see the Logging into the Web Interface section on page 12).

2.When the Home page opens, select Advanced Setup. The Welcome to AMX AP Advanced Setup page displays (FIG. 16).

FIG. 16 Advanced Setup

The information in this chapter is organized to reflect the structure of the web management screens for easy reference. However, it is recommended that you first configure a password to control access to the management interface. For details, see the System Setting - Administration section on page 26.

The Advanced Setup pages include the options in the table below. For details on configuration for each feature, see the corresponding page number.

Configuration Options

MenuDescription

Information

Page

System	Displays a summary of WAP250G settings
Client	Displays information on stations associated to the WAP250G
Network	Displays DHCP client, server, NAT, and PPPoE settings
Event Log	Displays the system message log

System

23

24

25

25

Administration	Configures the password for management access	26
Operation	Sets the device function	27
VAP Management	Manages the VAP’s traffic and priority	28
Reboot System	Restarts the system and resets configuration settings to factory	28
	defaults

NXA-WAP250G 802.11b/g Wireless Access Point 21