AMX NXA-WAP250G manual Information Network, Information Event Log

System Configuration

Information - Network

The Network page displays the current Dynamic Host Configuration Protocol (DHCP) client, DHCP server, and Point-to-Point Protocol over Ethernet (PPPoE) status (FIG. 20).

FIG. 20 Network Information

The items on this page include:

DHCP Client Setting: Enables the WAP250G to automatically obtain an IP address from a DHCP server. When disabled, or if a response is not received from the DHCP server, the WAP250G uses the configured static IP settings on the Network > DHCP Client page (default: Disabled).

DHCP Server/NAT Setting: Enables or disables the DHCP server on the WAP250G. The WAP250G DHCP server can assign IP addresses to any wireless client requesting the service. Addresses are assigned to clients from a common address pool configured on the Network > DHCP Server/NAT page (default: Disabled).

PPPoE Setting: Enables a connection to an Internet service provider using PPPoE. The PPPoE access user name and password can be set on the Network > PPPoE page (default: Disabled).

Information - Event Log

The Event Log page displays system messages generated during system operation. The logged messages can serve as a valuable tool for isolating WAP250G and network problems (FIG. 21).

FIG. 21 Event Log

NXA-WAP250G 802.11b/g Wireless Access Point 25