Allied Telesis AT-SBX31GP24, X3112, AT-SBX31FAN manual Installing the AT-SBx3165 PoE Power Supply

SwitchBlade x3112 Installation Guide

Installing the AT-SBx3165 PoE Power Supply

To install the AT-SBx3165 PoE Power Supply, perform the following procedure:

1.Choose a slot in the chassis for the AT-SBx3165 PoE Power Supply. You can install the power supply in either slot A or B.

2.If you want to install the power supply in slot A, remove the blank power supply panel by lifting the blank panel handle and lifting the panel out of the slot.

Warning

The AT-SBx3165 PoE Power Supply contains active electronic devices, which can be damaged by electro-static discharges (ESD). Follow the procedure given in “Protection Against Electrostatic Discharge (ESD)” on page 60 to guard against ESD damage when unpacking and installing these power supplies.

3. Remove the power supply from the shipping package.

Note

Store the packaging material in a safe location. You may use the original shipping material if you need to return the unit to Allied Telesis.

4.Ensure that the following hardware components are included in your package:

–One AT-SBx3165 PoE Power Supply

–One AC power cord

If one of these items is missing or damaged, contact your Allied Telesis sales representative for assistance.

5.Move the locking handle on the AT-SBx3165 to the unlocked or up position. See Figure 37 on page 66.

65