Allied Telesis AT-SBX3161, X3112, AT-SBX31FAN, AT-SBX31GP24, AT-SBX31XZ4, AT-SBX3165 manual SBx31GP

Chapter 2: Installation

				P
				O
				E
					P
					O
					E
				0
				2
SBx31GP0	24			4
		2
		4
		6	8
				10
				12
1				14
				16
				18
		3		20	plus
		5
		7	9		22
				11
				13
				15
				17
				19
				21	23
				8

Figure 47. Inserting the AT-SBx31GP24 PoE Line Card

5.Finger tighten the two thumbscrews on each side of the line card as displayed in Figure 48 to attach it to the front mounting rails of the chassis.

P
O
E
							P
							O
							E
0	SBx31GP0	24
			2
				4	6
						8
							10
							12
							14
							16
							18
			3				20	plus
2				5
					7
						9		22
							11
							13
							15
							17
							19
							21	23
4
								1801

Figure 48. Tightening Thumb Screws on the AT-SBx31GP24 Line Card

6.With a # 2 Phillips head screw driver, torque both thumbscrews to

.56 Nm (5 lb-in) maximum.

7.Repeat steps 2 to 6, if you have additional AT-SBx31GP24 PoE Line Cards to install.

8.For installation of the cables into the Ethernet ports, refer to the guidelines in “Cabling the Twisted-Pair or Fiber Optic Ports” on page 82.

74