Allied Telesis AT-SBX31FAN, X3112, AT-SBX31GP24, AT-SBX31XZ4, AT-SBX3161 AT-SBx31GP24 PoE Line Card

SwitchBlade x3112 Installation Guide

AT-SBx31GP24 PoE Line Card

The AT-SBx31GP24 PoE Line Card provides 24 10/100/1000 Base-T

Ethernet switching capability with Power over Ethernet (PoE). All ports are

RJ-45 connectors. See Figure 10.

SBx31GP24 2									plus
	4	6	8	10	12	14	16	18	20
0									22
1									23
3	5	7	9	11	13	15	17	19	21
									1798

Figure 10 AT-SBx31GP24 PoE Line Card

In addition, the AT-SBx31GP24 has the following features:

ˆUp to 30W of Class 4 (IEEE 802.1at) PoE+ power for each port

ˆStore and Forward switching supports line rates of:

–1,480,000 pps (1000 Mbps)

–148,000 pps (100 Mbps)

–14,800 pps (10 Mbps)

ˆJumbo frames supported up to 10 KB

ˆNon-blocking full-wire speed switching on all packet sizes

ˆMAC address table capacity of up to 16K addresses with automatic aging

ˆFlow control in full-duplex operation

ˆBack pressure in half-duplex operation

ˆAuto MDI/MDI-X.

ˆPort status LEDs adjacent to each port

ˆHot swappable

Note

The AT-SBx31GP24 PoE Line Card can only be installed in slots 0 through 3 or 6 through 11 in the AT-SBx3112 Chassis.

Note

The CLI mnemonic for the AT-SBx31GP24 PoE Line Card in the

Switchblade x3112 Management Software is “GE24POE”.

29