|
| VXI Technology, Inc. |
|
|
| INHOUSE:REGINT |
|
|
|
|
|
| Purpose | Controls the module’s response type to an interrupt acknowledge cycle |
|
|
|
|
|
| Type | Setting |
|
|
|
|
|
| Command Syntax | INHOUSE:REGINT <boolean> |
|
|
|
|
|
| Command Parameters | <boolean> = 0 1 OFF ON |
|
|
|
|
|
| *RST Value | 0 |
|
|
|
|
|
| Query Syntax | INHOUSE:REGINT? |
|
|
|
|
|
| Query Parameters | N/A |
|
|
|
|
|
| Query Response | ASCII numeric 0 or 1 |
|
|
|
|
|
| Description | The INHOUSE:REGINT command controls the module’s response type to an interrupt |
|
|
| acknowledge cycle. |
|
|
| When REGINT is set to false, the module uses reqt/reqf (request true/request false), |
|
|
| provided the latched interrupt bit is set tin the ‘SRE’. A reqt (upper 8 bits are 0x7D) is |
|
|
| generated for every latched event and a reqf (upper 8 bits are 0x7C) is generated for |
|
|
| every reading of the latched information using either pseudo register access or word |
|
|
| serial FETch:LATChed? Command. |
|
|
| When REGINT is set to true, only one interrupt is generated every time a latching |
|
|
| occurs. The upper 8 bits of the |
|
|
| Note: All letters of the command are required; there is no short form of the command. |
|
|
|
|
|
Examples
Command / Query | Response (Description) |
INHOUSE:REGINT 1 | (Sets REGINT to true) |
INHOUSE:REGINT? | 1 (Indicates that REGINT is set to true) |
Related Commands
INHOUSE:REG_ENABLE INHOUSE:PSEUDO
68 | VM4016 Command Dictionary |