www.vxitech.com
|
| INHOUSE:REG_ENABLE |
|
|
|
|
|
| Purpose | Controls the masking of REGINT |
|
|
|
|
|
| Type | Setting |
|
|
|
|
|
| Command Syntax | INHOUSE:REG_ENABLE <boolean> |
|
|
|
|
|
| Command Parameters | <boolean> = 0 1 OFF ON |
|
|
|
|
|
| *RST Value | 0 |
|
|
|
|
|
| Query Syntax | INHOUSE:REG_ENABLE? |
|
|
|
|
|
| Query Parameters | N/A |
|
|
|
|
|
| Query Response | ASCII numeric 0 or 1 |
|
|
|
|
|
| Description | REG_ENABLE controls the masking of REGINT. If REG_ENABLE is zero, then no |
|
|
| backplane interrupt can be generated. If REG_ENABLE is a |
|
|
| backplane interrupt can be generated. If PSEUDO is set to on, then a write to the |
|
|
| register at offset 0x38 also controls the masking - zero disables, a |
|
|
| This command is included for completeness. Enable/disable capabilities are provided |
|
|
| in the pseudo register interface to allow a complete register interface. This command |
|
|
| just provides that same capability in the word serial interface. |
|
|
| Note: All letters of the command are required; there is no short form of the command. |
|
|
|
|
|
Examples
Command / Query | Response (Description) |
INHOUSE:REG_ENABLE 1 |
|
INHOUSE:REG_ENABLE? | 1 |
Related Commands
INHOUSE:PSEUDO
INHOUSE:REGINT
VM4016 Command Dictionary | 69 |