NetComm Gateway Series manual Needs to be set up as either in static IP, DHCP, or PPPoE

Page 15

Gateway Assigned with a Public IP Address and Serving as an Internet Sharing Device

The SmartVoice gateway will have a Public IP address, regardless of whether it is the public IP from a static setting, DHCP (using a Cable Modem), or PPPoE (to connect to your ADSL account), and can use the built-in Internet sharing functions to allow other PCs attached to SmartVoice gateway LAN ports to share the Internet connection. The network connection is shown in following diagram.

Gateway IP Settings		Needs to be set up as either in static IP, DHCP, or PPPoE

NAT/STUN Settings		Unnecessary (Disabled)

DDNS Settings		Unnecessary (Disabled)

DHCP service for PCs, please refer to page		Default private IP addresses of the gateway LAN ranging
24 for the gateway DHCP server settings		from: 192.168.8.1-192.168.8.253
		Subnet Mask: 255.255.255.0
		Default Gateway: 192.168.8.254
		PC can be set either in DHCP or static IP mode

Note:	The above diagram shows a 4-port SmartVoice gateway for illustration purposes.
	An 8 port SmartVoice gateway could also be used depending upon your network
	requirements.

SmartVoice Gateway(s) User Guide	15
YML832 Rev2

Image 15

Contents Reference Guide Contents To ensure your Gateway complies with Australian Standards Important NoteProduct Overview IntroductionComputer/Network Broadband ServiceVoIP Service Items that you will need and things you will need to knowNetComm SmartVoice Gateway Features Voice FeaturesAdvance Firewall and DoS Protection Configuration & Maintenance General Specifications Features are only available in models which have FXO portsNetwork SmartVoice Gateways User Guide YML832 Rev2 Rear Panel all models Restore the GatewayConnecting your SmartVoice Gateways Installation and ApplicationsNetwork Connections Gateway Assigned with a Public IP AddressNetwork requirements Requirements Gateway behind a NAT/Firewall NetworkStun client Needs to be set up as either in static IP, DHCP, or PPPoE Integrating the SmartVoice Gateway with PBX Telephone ConnectionIntegrating the SmartVoice Gateway with PBX Integrating the SmartVoice Gateway with PBX Instructions Configuring the Gateway via WEB BrowserIP Configuration Setting WAN Port Network SettingsSetting Dynamic IP Dhcp Clone MAC DNS SettingsNetwork Settings LAN LAN interface modeWAN QoS QoS SettingsNAT/DDNS NAT Traversal Example DdnsPrefix Number Rules Telephony SettingsHotline Functions FXO Line VoIP call in optionsDescription SIP Settings 164 SmartVoice Gateways User Guide Each line registers to Proxy independently FXS/ FXO Representative number registers to ProxyPrivate Network Server SettingsPrivate Network Numbers Calling Feature Instructions Calling FeaturesAdvanced Options Payload Type payload type of RFC2833 Flash Time Line SettingsCodec Settings Fax Settings Drop Inactive Call Digit Map Phone Book Speed Dial Caller Filter Transit Call Control Gateway a PIN Code * Gateway B Number Dialing principle to enable PIN codeLong Distance Exception Table Long-Distance Control TableCPT/Cadence Settings Busy Tone Cadence MeasurementCPT parameters Table CPT Auto Detect Direct Connection to Pstn SmartVoice Gateways User Guide YML832 Rev2 Connected to a PBX Extension Line 36008914 Filling in the CPT Table Save SettingsCurrent Status and System Information RTP Packet Summary Stun Inquiry Ping Test Port Filtering IP Filtering MAC Filtering Virtual Server DMZ URL Filter Special Applications DoS Prevention Settings Enable Source IP Blocking Block the IP NTP Network Time Protocol Backup and Restore ConfigurationProvision Settings System Operations Save Settings Software Upgrade Logout Configuring the Gateway via IVR Configuration MethodsPreparation Inquire Current Gateway’s WAN Port IP address IVR Interactive Voice ResponseDNS IP address Set/Query IVR Functions TableSet/Query Gateway Telephone Number Representative Number Adsl PPPoE Settings IP Configuration Settings WAN port Static IP SettingsSelect PPPoE PPPoE Account SettingsPPPoE Password Setting Save Settings and RestartPPPoE Character Conversion Table Dialing and dialed number routing principle InstructionDialed Number Processing Flow End 10BASE-T Appendix a GlossaryDNS Http NAT TCP VSP RJ-45 Network Ports Appendix B Cable InformationStraight and crossover cable configuration Straight-Through CablingCross-Over Cabling Contact Information Appendix C Registration and Warranty InformationProduct Warranty PO Box 1200, Lane Cove NSW 2066 Australia